1. Manuals
  2. Brands
  3. Fiery Manuals
  4. Printer Accessories
  5. Fiery EX12 Color server
  6. Printing manual

Fiery EX12 Printing Manual

Hide thumbs Also See for Fiery EX12:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, Installation Manual
Fiery EX12/EX2000d
PRINTING GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Fiery Fiery EX12

Summary of Contents for Fiery Fiery EX12

  • Page 1 Fiery EX12/EX2000d PRINTING GUIDE...
  • Page 2 ® This manual is part of a set of Fiery documentation that includes the following About the manuals for users and system administrators: Documentation • The Quick Start Guide summarizes the steps for configuring the Fiery and printing. It also describes how to access the online documentation. •...
  • Page 3 Copyright © 2002 Electronics For Imaging, Inc. All rights reserved. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Electronics For Imaging, Inc., except as expressly permitted herein.
  • Page 4 FCC Information WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Class B Declaration of Conformity This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 5 Proprietary Rights You acknowledge that the Software is proprietary to EFI and its suppliers and that title and other intellectual property rights therein remain with EFI and its suppliers. Except as stated above, this Agreement does not grant you any right to patents, copyrights, trade secrets, trademarks (whether registered or unregistered), or any other rights, franchises or licenses in respect of the Software.

  • Page 7: Table Of Contents

    Contents About the Documentation Introduction About this manual Chapter 1: Printing from Windows Computers Printing from applications Setting options and printing from Windows Using saved settings Using Shortcuts 1-14 Defining and printing custom page sizes 1-16 Working with custom page sizes in Windows 9x/Me 1-16 Working with custom page sizes in Windows NT 4.0 1-19...
  • Page 8 viii Contents Chapter 4: Downloading Files and Fonts Using Fiery Downloader Downloading printer fonts Managing printer fonts Chapter 5: Printing Variable Data Documents About variable data printing Printing variable data documents with FreeForm How FreeForm works Creating the master document Creating the variable document Combining the FreeForm master with the variable document Using FreeForm...
  • Page 9 ix Contents Chapter 7: Using EFI TIFF/IT Converter TIFF/IT file formats Using EFI TIFF/IT Converter Setting EFI TIFF/IT Converter preferences Converting files Chapter 8: Using Hot Folders Overview of Hot Folders File format restrictions Using the Hot Folder Control Panel Creating and deleting Hot Folders Enabling and disabling Hot Folders Setting Hot Folder preferences...
  • Page 10 x Contents Chapter 10: Using Fiery E-mail Service How Fiery E-mail Service works 10-1 Printing using an E-mail Client 10-2 Job Control 10-4 Printing using the E-mail Port Monitor 10-5 Appendix A: Print Options About printer drivers and printer description files Where to set print options Print option override hierarchy Default settings...

  • Page 11: About This Manual

    Printers dialog box on Microsoft Windows computers, or in the Chooser on Apple Mac OS computers, and then print from within any application. The term “Fiery” is used in this manual to refer to the Fiery EX12/EX2000d Color Server installed in the copier/printer. The name “Aero” is used in illustrations to represent the Fiery.
  • Page 12 xii Introduction • Using Fiery Scan ™ software EX12 • Using the EFI TIFF/IT Converter • Using Hot Folders • Monitoring jobs and accessing information using Fiery WebTools ™ • Specifying and overriding job settings, generating a list of fonts installed on the Fiery, and troubleshooting information...

  • Page 13: Chapter 1: Printing From Windows Computers

    1-1 Printing from applications This chapter describes printing to the Fiery from Windows computers. You can print Chapter 1: from a networked Windows computer or from a computer using Windows (WINS) Printing from printing. You can also save files to print at a remote location. Windows Computers You can print from a Windows computer in any one of a number of ways.

  • Page 14: Setting Options And Printing From Windows

    1-2 Printing from Windows Computers Setting options and printing from Windows To print from Windows, select and install the corresponding Adobe PostScript printer driver. The drivers are included on the Fiery User Software CD. Once the Adobe PostScript printer driver and printer description file (PPD) are installed, you can specify print settings for a particular job and print it to the Fiery.
  • Page 15 1-3 Printing from applications 3. Click the Fiery Printing tab. Fiery EX12 Saved settings, see page 1-9 Shortcuts, see page 1-14 Print option bars Click to display all print options Click to hide all print options Fiery EX2000d Saved settings, see...
  • Page 16 1-4 Printing from Windows Computers 4. Click the ColorWise print option bar. Fiery EX12 Fiery EX2000d In the Print Mode area, specify the color mode for the job.To use advanced color management features, such as Rendering Style, click Expert Settings and proceed to step 5;...
  • Page 17 1-5 Printing from applications 5. In the Expert Color Settings dialog box, click Update to display the current Fiery settings. Fiery EX12 Click Update Fiery EX2000d Click Update If the Update button does not appear, make sure Two-Way Communication is set up,...
  • Page 18 1-6 Printing from Windows Computers 6. Click the Owner Information print option bar. Fiery EX12 Fiery EX2000d...
  • Page 19 1-7 Printing from applications 7. Enter the Group Name, Group Password, and text in the Notes area. Enter user and job identification information for managing purposes, or whatever information is required at your site. The Administrator or Operator can edit the Group Name and Group Password from the Command WorkStation Properties window.
  • Page 20 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery icon and choose Properties (Windows 9x/Me), Document Defaults (Windows NT 4.0), or Printing Preferences (Windows 2000/XP). Fiery EX12 Fiery EX2000d 3. Specify the default settings for your print job, as described on page 1-2.

  • Page 21: Using Saved Settings

    1. Make sure that Default Settings appears in the Saved Settings menu, and then configure options from the print option bars. As soon as you change any settings, the Saved Settings menu displays Untitled instead of Default Settings. Fiery EX12 Disk button Settings button...
  • Page 22 1-10 Printing from Windows Computers Fiery EX2000d Disk button Settings button 2. Click the Disk button. 3. Enter a Setting Name and click OK. The name appears in the Saved Settings menu.
  • Page 23 1-11 Printing from applications O LOAD SAVED SETTINGS 1. From the Fiery Printing tab, click the Saved Settings menu. 2. Choose the settings you want to use. The options are automatically configured with the saved settings. O DELETE SAVED SETTINGS 1.
  • Page 24 1-12 Printing from Windows Computers XPORT SAVED SETTINGS 1. From the Fiery Printing tab, click the Settings button. 2. Choose the Saved Settings you want to export and click Export. 3. Browse to the location in which to save the file, enter a file name, and then click OK. The file name must include the .sav extension and can be up to eight characters (not including the extension).
  • Page 25 1-13 Printing from applications O IMPORT SAVED SETTINGS 1. From the Fiery Printing tab, click the Settings button. 2. Click Import. 3. Browse to the location of the saved settings file you want to import. 4. Select the file you want to import and click OK. 5.

  • Page 26: Using Shortcuts

    You can access and change these settings quickly and easily using the Shortcuts. You can also access some page layout and finishing options by right-clicking the image of the page directly below Shortcuts. Fiery EX12 Print Option Shortcuts Page Shortcuts...
  • Page 27 1-15 Printing from applications O SET PRINT OPTIONS USING HORTCUTS 1. From the Fiery Printing tab, position your cursor over the print option you want to set. 2. Click the selected print option and specify the appropriate settings. Alternatively, you can right-click the print option and specify the settings directly. 3.

  • Page 28: Defining And Printing Custom Page Sizes

    1-16 Printing from Windows Computers Defining and printing custom page sizes With custom page sizes, you can define the dimensions of a printed page. After you define a custom page size, you can use it from within an application without having to redefine it each time you print.
  • Page 29 1-17 Defining and printing custom page sizes 3. Click the Fiery Printing tab and click the Paper Source print option bar. Fiery EX12 Custom button Fiery EX2000d Custom button...
  • Page 30 1-18 Printing from Windows Computers 4. Click Custom. The Enter Custom Paper Size dialog box appears. Fiery EX12 Fiery EX2000d 5. Specify options to define the custom page size. —Enter the width of the print job. Width —Enter the length of the print job.

  • Page 31: Working With Custom Page Sizes In Windows Nt 4.0

    1-19 Defining and printing custom page sizes O EDIT A CUSTOM PAGE SIZE WITH THE INDOWS E PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery icon and choose Properties. 3. Click the Fiery Printing tab and then click the Paper Source print option bar. 4.
  • Page 32 1-20 Printing from Windows Computers 3. Click the Page Setup tab. Fiery EX12 Fiery EX2000d...
  • Page 33 1-21 Defining and printing custom page sizes 4. Choose PostScript Custom Page Size from the Paper Size menu. The PostScript Custom Page Size Definition dialog box appears. Fiery EX12 Fiery EX2000d 5. Specify options to define the custom page size.
  • Page 34 DIT A CUSTOM PAGE SIZE WITH THE INDOWS PRINTER DRIVER 1. Click Start, choose Settings, and then choose Printers. 2. Right-click the Fiery icon and choose Document Defaults. 3. Click the Advanced tab and select Paper Size from the Paper/Output settings. Fiery EX12 Fiery EX2000d...

  • Page 35: Working With Custom Page Sizes In Windows 2000/Xp

    1-23 Defining and printing custom page sizes 4. Choose PostScript Custom Page Size. The PostScript Custom Page Size Definition dialog box appears. If it does not appear, click Edit Custom Page Size. 5. Edit the settings, as described on page 1-21, and click OK.
  • Page 36 1-24 Printing from Windows Computers Fiery EX12 Fiery EX2000d 5. Choose PostScript Custom Page Size from the Paper Size menu. The PostScript Custom Page Size Definition dialog box appears.
  • Page 37 1-25 Defining and printing custom page sizes Fiery EX12 and Fiery EX2000d 6. Specify options to define the custom page size. —Enter the width and height of the print job. Custom Page Size Dimensions —Select a unit of measurement for the print job.

  • Page 38: Saving Files To Print At A Remote Location

    1-26 Printing from Windows Computers 5. Choose PostScript Custom Page Size from the Paper Size menu. The PostScript Custom Page Size Definition dialog box appears. If it does not appear, click Edit Custom Page Size. 6. Edit the settings, as described on page 1-25, and click OK.

  • Page 39: Chapter 2: Printing From Mac Os Computers

    2-1 Printing from applications You can print to the Fiery just as you would print to any other printer from any Chapter 2: application. First, select the Fiery as the current printer in the Chooser, and then Printing print the file from within the application. from Mac OS Computers Another way to print from a Mac OS computer is to download PostScript (PS),...
  • Page 40 2-2 Printing from Mac OS Computers 4. If your network is divided into zones, select the zone in which the Fiery is located. 5. Select the Fiery by <Server Name>_<Device Name>_<Queue Name> from the “Select a PostScript Printer” list. The names of all supported printers in the zone appear in the list on the right. If your system administrator has not enabled the connection to the Print queue or the Direct connection, the corresponding names will not appear in this list.

  • Page 41: Setting Options And Printing From Mac Os Computers

    2-3 Printing from applications Setting options and printing from Mac OS computers In Mac OS applications, print options are set from both the Page Setup dialog box and the Print dialog box. For details on specific print options, see Appendix Some default print options are set by the administrator during Setup.
  • Page 42 2-4 Printing from Mac OS Computers 4. Choose Print from the application’s File menu. 5. Select the Fiery as your printer and specify settings for the print options displayed. Print dialog boxes vary across applications. From the Paper Source menu, choose the paper tray for the job. For example, you can specify that the job be printed on paper in the Special Feeder.
  • Page 43 Group Name and Group Password options are not available when printing to Direct connection. For more information on Command Workstation overrides, see the Job Management Guide. 7. Choose Printer Specific Options and specify the appropriate settings for your print job. Fiery EX12 Choose Printer Specific Options...
  • Page 44 2-6 Printing from Mac OS Computers Fiery EX2000d Choose Printer Specific Options These print options are specific to the Fiery and the copier/printer; you may need to scroll to see all the options. They override settings in Fiery Printer Setup, but can be changed from Command WorkStation, Fiery WebSpooler, or Fiery Spooler.

  • Page 45: Defining Custom Page Sizes

    O DEFINE A CUSTOM PAGE SIZE 1. Choose Page Setup from the application’s File menu. 2. For Paper, choose Custom. 3. Choose Custom Page Default. Fiery EX12 Choose Custom Displays custom Page Default page names Displays limits for...
  • Page 46 2-8 Printing from Mac OS Computers Fiery EX2000d Choose Custom Page Default Displays custom page names Displays limits for selected dimension Enter a custom page name 4. Enter the page dimensions and margins. To view the minimum and maximum sizes, click the PPD Limits menu. If you enter invalid sizes, an error message appears.

  • Page 47: Chapter 3: Printing From Unix Workstations

    3-1 Printing to the Fiery You can print to the Fiery directly from UNIX workstations. Jobs printed to the Chapter 3: Fiery are sent to the Print or Hold queue and can be manipulated from Command Printing WorkStation or from Windows and Mac OS computers on the network using from UNIX Fiery WebSpooler or Fiery Spooler.
  • Page 48 3-2 Printing from UNIX Workstations UNIX O PRINT FROM • On a system running SunOS 4.1.x or another BSD-based variant, use the lpr command to send a job to the Fiery, as follows: lpr <-Pprinter> <-#copies> <filename> For example, if the Print queue of your Fiery is named print_Server , your file is named Sample...
  • Page 49 3-3 Printing to the Fiery O DISPLAY A LIST OF JOBS IN THE QUEUE • On a system running SunOS 4.1.x or another BSD-based variant, use the lpq command to see printer jobs in the queue, as follows: lpq <-Pprinter> For example, if the Print queue of your Fiery is named print_Server , type:...
  • Page 50 3-4 Printing from UNIX Workstations O REMOVE JOBS FROM THE QUEUE Unless you log in as the user, you can remove only your own jobs. root • On a system running SunOS 4.1.x or another BSD-based variant, use the lprm command to remove jobs from the queue, as follows: lprm <-Pprinter>...

  • Page 51: Chapter 4: Downloading Files And Fonts

    4-1 Using Fiery Downloader Fiery Downloader allows you to send PostScript (PS), Encapsulated PostScript (EPS), Chapter 4: TIFF, and Portable Document Format (PDF) files directly to the Fiery without using Downloading the application in which they were created. It also allows you to manage printer fonts Files and Fonts on the Fiery.
  • Page 52 4-2 Downloading Files and Fonts O VIEW INFORMATION WITH IERY OWNLOADER 1. Double-click the Fiery Downloader icon or choose Fiery Downloader from the Start > Programs menu. 2. Select the Fiery in the Chooser window and click OK (Windows) or Connect (Mac OS). The Fiery Downloader Status window appears, displaying the Fiery Downloader toolbar, menus, and status bar.
  • Page 53 4-3 Using Fiery Downloader Buttons for some menu functions appear in the toolbar at the top of the window. Open Click to connect to a different Fiery. Download Click to download a file or font to the Fiery. Status If you are viewing the font list, click to display the status window for the current Fiery.

  • Page 54: Downloading Printer Fonts

    4-4 Downloading Files and Fonts Downloading printer fonts You can download a variety of file types, as well as fonts, to the Fiery. You can specify a limited number of print option settings for the files you download. O DOWNLOAD A FILE OR FONT WITH IERY OWNLOADER 1.
  • Page 55 4-5 Using Fiery Downloader 4. Choose the file type to display from the Files of type (Windows) or Show (Mac OS) menu. All Known Formats lists all files in formats supported by Fiery Downloader. You can download files and fonts in the same batch. If the fonts are used by files in the same batch, the fonts should be downloaded first.
  • Page 56 4-6 Downloading Files and Fonts 6. Select the file name and click Add File(s) (Windows) or Add (Mac OS). The File name field (Windows) displays the name of the selected file before you click Add. You can navigate to different drives and directories to select files to download. Click Add All (Mac OS) to add all files in a folder.
  • Page 57 4-7 Using Fiery Downloader 8. Specify the following information in the dialog box and click OK. The options you set apply only to the selected file. You can set different options, or leave the default settings, for each file. —Enter the number of copies. Copies (PostScript and EPS files only)—Change the Brightness setting if a file Brightness...

  • Page 58: Managing Printer Fonts

    4-8 Downloading Files and Fonts Managing printer fonts The Fiery includes 136 PostScript fonts; for a complete list, see Appendix In addition, two Adobe Multiple Master fonts are included and used for font substitution in PDF files. Before downloading a file that uses fonts not resident on the Fiery, you must download the fonts (unless the fonts are embedded in the file).
  • Page 59 4-9 Using Fiery Downloader Printer fonts and Mac OS screen fonts Like all PostScript fonts, the fonts included with the Fiery come in two forms: printer fonts and screen fonts. The printer fonts are installed on the Fiery hard disk. The screen fonts, which are included with the Fiery user software, should be installed on your Mac OS computer.
  • Page 60 4-10 Downloading Files and Fonts O VIEW FONT INFORMATION UPDATE PRINT AND DELETE FONTS • Choose Font List from the File menu, or click the Font List button. If the Direct connection is not published, you cannot view the Font List or perform any of the tasks described in this procedure.

  • Page 61: Chapter 5: Printing Variable Data Documents

    • You can create the master and variable elements of a job in a popular variable data printing application, such as Pageflex Persona, and then print the job to the Fiery through a supported file format. The Fiery is compatible with the Creo VPS, Xerox VIPP, and PPML variable data formats.

  • Page 62: Printing Variable Data Documents With Freeform

    5-2 Printing Variable Data Documents You cannot use the following print options and settings when printing variable data: Combine Separations to On Compression to Off Optimize Power Point to On Halftone Screen to any other setting than Contone For more information, see Appendix Printing variable data documents with FreeForm In FreeForm variable data printing, you can use print options to define master...

  • Page 63: Creating The Master Document

    5-3 Printing variable data documents with FreeForm Spooler, or Fiery WebSpooler. You can also use Command WorkStation to monitor and manage all the FreeForm masters stored on the Fiery. For more information, see Job Management Guide. Creating the master document Before you can use FreeForm, you must create a master document and a variable document.

  • Page 64: Creating The Variable Document

    5-4 Printing Variable Data Documents Although the Fiery can store up to 100 FreeForm masters, the printer driver interface, Fiery WebSpooler, and Fiery Spooler allow you to select numbers 1 through 15 only. To create a FreeForm master with a number greater than 15, the operator must set the Create Master and Use Master options and RIP the job from Command WorkStation.

  • Page 65: Combining The Freeform Master With The Variable Document

    5-5 Printing variable data documents with FreeForm When you have created a variable document, print it to the Fiery and specify that it be combined with the corresponding FreeForm master (see page 5-8). Combining the FreeForm master with the variable document When you print a variable document to the Fiery, you specify the FreeForm master created from your master document with the Use Master print option.
  • Page 66 5-6 Printing Variable Data Documents A master document can include more than one page. When you print a variable document and specify a FreeForm master that contains multiple pages, the variable pages are combined with the master pages in a cyclical fashion. The following example illustrates how a variable document combines with a two-page master document.

  • Page 67: Using Freeform

    5-7 Printing variable data documents with FreeForm Using FreeForm This section provides some suggestions to help you print variable data jobs correctly. • Consult your administrator or operator on how FreeForm master numbers are assigned at your site. If FreeForm printing is used by a large number of users at your site, FreeForm master numbers, or ranges of numbers, can be assigned to specific users or groups.
  • Page 68 5-8 Printing Variable Data Documents The following settings for the variable document override the corresponding settings in the master document: Media Type Paper Source Save Fast Reprint O PRINT VARIABLE DATA DOCUMENTS 1. Create a master document. The following example shows one page of a master document for a tri-fold brochure that was created with a page layout application.
  • Page 69 5-9 Printing variable data documents with FreeForm 2. Print the master document to the Fiery with the Create Master print option set to one of the FreeForm Master numbers (1 through 15). Or, set the Create Master option to None and instruct the operator to use overrides to create a FreeForm master from this job.
  • Page 70 5-10 Printing Variable Data Documents 4. Print the variable document to the Fiery with the Use Master print option set to the appropriate FreeForm master number. The FreeForm master number may be one you set when you sent the master document, or it may be one that was assigned by the operator.

  • Page 71: Printing Variable Data Documents With Freeform 2

    5-11 Printing variable data documents with FreeForm 2 Printing variable data documents with FreeForm 2 FreeForm 2 extends the functionality of FreeForm by allowing you to assign an individual page of a FreeForm master to each page of a variable document sent to the Fiery.

  • Page 72: Printing Documents From Variable-Data Printing Applications

    Persona. You can then print the job to the Fiery from the application using a compatible file format. The Fiery is compatible the following variable data formats: • Xerox VIPP version 3.0 with EPS Caching • Creo VPS (Variable Print Specification) version 1.5 •...
  • Page 73 5-13 Printing documents from variable-data printing applications The global objects in each environment can be managed with the Fiery VDP Resource Manager utility. You can view all the installed global objects in the Fiery VDP cache area. For a project, all global objects are grouped under an environment name. To install and configure the Fiery VDP Resource Manager on a Windows or Mac OS computer, see User Software Installation Guide.
  • Page 74 5-14 Printing Variable Data Documents 3. Click the folder of a specific server to display the list of global objects. 4. To delete global objects, click the specific global object environment and choose Remove Cache and Source from the Actions menu. To delete the cache only and not the source, choose Remove Source from the Actions menu.

  • Page 75: Chapter 6: Scanning

    You can also use WebScan to retrieve a scan. Scanning is only supported on the Fiery EX12. The following requirements and constraints apply: • Fiery Scan cannot be used over the parallel port; it requires a network connection.

  • Page 76: Using Fiery Remote Scan

    6-2 Scanning Using Fiery Remote Scan With Fiery Remote Scan, you can initiate and retrieve scan files remotely. You can open the scan file in a host application, such as Photoshop, and send the scan file to a mailbox, the Hold queue, or an e-mail address. You can then retrieve files using Fiery Scan or WebScan.
  • Page 77 6-3 Using Fiery Remote Scan 7. Click the Initiate tab.
  • Page 78 6-4 Scanning —Choose ADF or Platen. Source —Choose the number of sides the copier/printer must scan. Sides (This option is only available if you are scanning from the document feeder.) —Choose the size of the document the Fiery scans. Size (This option is only available if you are scanning from the copier glass.) —Choose a value for the resolution.

  • Page 79: Sending A Scan Job To A Specific Destination

    6-5 Using Fiery Remote Scan Sending a scan job to a specific destination When you initiate a scan, you select where to send the file. After selecting the appropriate settings for your scan job from the Acquire Jobs dialog box, you can specify the location to send the scan.
  • Page 80 6-6 Scanning Sending a scan to the Hold Queue for document merging and editing When you send a scan file to the Hold queue, the Fiery automatically converts and stores the file as a PDF on the Fiery hard disk. You can then manipulate the file using DocBuilder Pro and Command Workstation.
  • Page 81 6-7 Using Fiery Remote Scan Scan to E-mail You can send a scanned image via e-mail, as either an attachment or a URL. For more details on E-mail services, see Chapter O SEND A SCAN FILE TO AN E MAIL ADDRESS 1.

  • Page 82: Retrieving Scan Files

    6-8 Scanning Retrieving scan files Once you have scanned a document to the Fiery mailbox, you can access the documents with Fiery Remote Scan or the WebScan WebTool. O RETRIEVE SCAN FILES USING IERY EMOTE 1. Start Photoshop. 2. Choose Import from the Photoshop File menu and click Select TWAIN_32 Source. 3.
  • Page 83 6-9 Using Fiery Remote Scan 7. Enter the Mailbox number for the scan file. All scan jobs in the Mailbox are displayed. 8. Select the specific scan job you want to open. To open all pages of a scan, select All; to open a specific page, select Page and enter the specific number in the Page field.
  • Page 84 6-10 Scanning O RETRIEVE SCAN FILES USING IERY 1. Click the WebScan WebTool from the Fiery WebTools menu. The WebScan window appears. 2. Enter the Mailbox number in the Mailbox field. The Mailbox number is the directory you specified with the copier’s Scanner Mode.
  • Page 85 6-11 Using Fiery Remote Scan 4. Select the file you want to open. 5. Choose PDF, TIFF, or JPEG from the File Format menu. If you want to save your job as a JPEG, select RAW as the File Format and enter a page number in the Page field.

  • Page 86: Using The Fiery Bar Scan Application

    6-12 Scanning Using the Fiery Bar Scan application The Fiery Bar Scan application allows you to initiate and retrieve scans using the Fiery Advanced Controller Interface (FACI). The Fiery Bar Scan application user interface and procedures are similar to the Fiery Bar Scan interface for Windows, except that you cannot acquire the scan in Photoshop.
  • Page 87 6-13 Using the Fiery Bar Scan application —Choose ADF or Platen. Source —Choose the number of sides the copier/printer must scan. Sides (This option is only available if you are scanning from the document feeder.) —Choose the size of the document the Fiery scans. Size (This option is only available if you are scanning from the copier glass.) —Choose a value for the resolution.

  • Page 88: Scanning To The Fiery Hard Disk Drive

    6-14 Scanning 3. Enter the specific Mailbox number for the scan file. All scan jobs in the Mailbox are displayed. 4. Select the specific scan job you want to open. To open all pages of a scan, click All; to open a specific page, enter the specific number in the Page field.

  • Page 89: Sending The Scan Job To A Specific Destination

    6-15 Scanning to the Fiery hard disk drive 4. Press the line selection button next to Scan Job. 5. Press the line selection button next to Source. 6. Choose your Document Source. Choose ADF if you are scanning from the ADF; choose Platen if you are scanning from the glass.
  • Page 90 6-16 Scanning 3. Choose PDF, TIFF, or JPEG as a File Format. Multiple JPEG images in a single file are not supported. 4. Press the line selection button next to Exit Destination. 5. Press the line selection button next to Start Scan. 6.
  • Page 91 6-17 Scanning to the Fiery hard disk drive 9. Press the line selection button next to Exit Destination. 10. Press the line selection button next to Start Scan. 11. Enter a name for your job. O SEND A SCAN FILE USING THE FIERY ADDRESS BOOK 1.

  • Page 93: Chapter 7: Using Efi Tiff/It Converter

    7-1 TIFF/IT file formats This chapter describes how to use the EFI TIFF/IT Converter application to convert Chapter 7: TIFF/IT-p1 files to PS or EPS file formats. EFI TIFF/IT Converter is a feature of Using EFI the Fiery Graphic Arts Package, which allows input of TIFF/IT files to RIP through TIFF/IT a Hot Folder.

  • Page 94: Using Efi Tiff/It Converter

    7-2 Using EFI TIFF/IT Converter Using EFI TIFF/IT Converter The EFI TIFF/IT Converter application monitors incoming conversion jobs on your computer when you drag and drop files onto the Control Panel or an Input Folder. The EFI TIFF/IT Converter Control Panel allows you to configure conversion parameters and create and manage all your folders.

  • Page 95: Setting Efi Tiff/It Converter Preferences

    7-3 Using EFI TIFF/IT Converter Setting EFI TIFF/IT Converter preferences You can specify several preferences for the EFI TIFF/IT, including resolution, compression, default Input Folder location for retrieving source files, and Output Folder location for storing converted files. The Input Folder allows you to drag and drop files onto the folder to convert them. The folder can be shared across the network so that other users can have access to the conversion process without running the converter application on their local computers.
  • Page 96 7-4 Using EFI TIFF/IT Converter —Select 200, 400, or 600 dpi. Resolution —Select Nearest Neighbor (Faster) or Bilinear (Better). Anti-Aliasing —Select Lossless. Compression —Choose PostScript or EPS. Output Type If the source file contains spot color, it can only be converted to PostScript. —...

  • Page 97: Converting Files

    7-5 Using EFI TIFF/IT Converter 2. Select an existing folder or navigate to the location where you want to create a new Input/Output Folder. Click OK. You cannot use the following folder types as Input/Output Folders: • The System Folder of your computer •...
  • Page 98 7-6 Using EFI TIFF/IT Converter ONVERT FILES BY DRAGGING AND DROPPING FILES ONTO EFI C ONVERTER CONTROL PANEL OR NPUT OLDER • Drag and drop the files onto the Control Panel of the EFI Converter application or the Input Folder. The conversion process starts once you select and drag all necessary files (.ct, .lw, .hc, .fp).

  • Page 99: Chapter 8: Using Hot Folders

    8-1 Overview of Hot Folders This chapter describes how to use the Hot Folders application to store and reuse Chapter 8: frequently used print options when printing PostScript and PDF files on the Fiery. Using The Hot Folders application is a feature of the Fiery Graphic Arts Package. Hot Folders Overview of Hot Folders A Hot Folder is a special folder to which you can assign a group of print options.

  • Page 100: File Format Restrictions

    8-2 Using Hot Folders File format restrictions The Hot Folder application supports the printing of PostScript and PDF jobs. However, if you specify print options that differ from and override the printer default options, or specify imposition options, some destination servers may offer only restricted file format support.

  • Page 101: Using The Hot Folder Control Panel

    8-3 Using the Hot Folder Control Panel Using the Hot Folder Control Panel The Hot Folder application continuously monitors the Hot Folders on your computer for new jobs. This activity occurs in the background; you do not need to start the Hot Folder application for the monitoring to occur.

  • Page 102: Creating And Deleting Hot Folders

    8-4 Using Hot Folders O START THE OLDER APPLICATION AND DISPLAY ONTROL ANEL • Click Start, choose Programs, and then choose Hot Folder or, if you have created a shorcut to the application, double-click the shortcut on your computer desktop. You can also display the Hot Folder Control Panel by right-clicking the Hot Folder icon in the Status area of the Windows taskbar and choosing Open Control Panel from the menu that appears, or by opening the Windows system Control Panel and...
  • Page 103 8-5 Using the Hot Folder Control Panel 2. Select an existing folder or navigate to the location where you want to create a new folder and enter the folder name. 3. Click OK. The Properties dialog box for the Hot Folder appears. Do not use the following folder types as Hot Folders: •...
  • Page 104 8-6 Using Hot Folders To add a server from the local subnet, select it and click OK. To manually configure the connection to the Fiery, click the Manual tab and enter the IP address or DNS name of Fiery and click OK. 6.

  • Page 105: Enabling And Disabling Hot Folders

    8-7 Using the Hot Folder Control Panel O DELETE A OLDER FROM YOUR COMPUTER 1. In the Hot Folder Control Panel, select the folder you want to remove. Make a note of the folder’s directory path. 2. If the folder is not already disabled, click Disable. You must disable a folder before you can remove it.

  • Page 106: Setting Hot Folder Preferences

    8-8 Using Hot Folders Enabled folders are marked with a green state in the Control Panel; disabled folders are marked with a red state. Setting Hot Folder preferences You can specify several preference settings for the Hot Folder application, including the unit of measurement used for imposition settings, and the default folder location for temporary files and imposition templates.

  • Page 107: Assigning Properties To Hot Folders

    8-9 Assigning properties to Hot Folders Assigning properties to Hot Folders You can use the Properties dialog box to define the settings associated with each Hot Folder. You can specify the print options, imposition settings, server destination, and queue destination each Hot Folder uses for incoming jobs. Use any of the following methods to display the Properties dialog box: •...
  • Page 108 8-10 Using Hot Folders You can instruct the Hot Folder application to store archive copies of job files in the Fail and Move folders. You can also specify alternate folder locations for archive files. O ARCHIVE OLDER JOB FILES 1. Click Advanced in the Hot Folder Properties dialog box. The Folder Settings dialog box appears.

  • Page 109: Specifying Hot Folder Print Options

    For more information on print options, see Appendix O SET PRINT OPTIONS FOR A OLDER 1. To enable print settings, select Job Settings in the Properties dialog box. If necessary, click Define to display the Job Settings dialog box. Fiery EX12...

  • Page 110: Specifying Imposition Options

    8-12 Using Hot Folders Fiery EX2000d Print options are organized into functional groups. You can expand each group by clicking the corresponding menu bar. 2. Specify print options by choosing the print option from the appropriate menu. 3. Click OK to return to the Properties dialog box. Specifying imposition options If you have DocBuilder Pro installed and enabled on the Fiery, you can configure the Hot Folder application to apply prebuilt imposition templates to print jobs.
  • Page 111 8-13 Assigning properties to Hot Folders O SPECIFY IMPOSITION OPTIONS 1. In the Properties dialog box, select Imposition Settings to enable imposition options. If necessary, click Define to display the Imposition Settings dialog box. Imposition settings are only available if you have DocBuilder Pro installed and enabled for Fiery.
  • Page 112 8-14 Using Hot Folders 4. To specify custom imposition settings, select Custom, and then click Sheet, Layout, or Finishing to expand the panel of corresponding settings. Panel Setting Result Sheet Creep Adjusts imageable area of page to compensate for the Adjustment binder’s creep that results from folding multiple sheets in saddle or nested saddle bindings.

  • Page 113: Viewing Hot Folder Job Logs

    8-15 Viewing Hot Folder Job Logs Viewing Hot Folder Job Logs You can view a log of all jobs that have been processed through a Hot Folder. O VIEW THE OG FOR A OLDER 1. In the Hot Folder Control Panel, select the folder for which you want to view the Job Log.

  • Page 115: Chapter 9: Tracking And Monitoring Jobs

    9-1 Accessing Fiery WebTools Fiery user software includes a variety of tools that allow you to track and manage Chapter 9: print jobs. Access to some tools is controlled by your site administrator, but other Tracking and tools are available to all users. Monitoring Jobs •...
  • Page 116 9-2 Tracking and Monitoring Jobs O ACCESS IERY OOLS 1. Start your Internet browser. For information about supported platforms and browsers, see the User Software Installation Guide. 2. Enter the IP address or DNS name of the Fiery. For this information, contact the operator or administrator. 3.

  • Page 117: Checking Fiery Status With The Status Webtool

    You can use the Status WebTool to see what jobs are currently processing and printing. To access the Status WebTool, open the Fiery home page and click Status. The current RIP Status and Printer Status appear in the window. Fiery EX12 Fiery EX2000d...

  • Page 118: Accessing Information With Weblink

    9-4 Tracking and Monitoring Jobs To open a new browser window for the Status display, click Float. You can then close other browser windows and leave the Status window open to continue checking the status of the Fiery. As long as you keep the Status window open, it is dynamically updated.

  • Page 119: Chapter 10: Using Fiery E-Mail Service

    10-1 How Fiery E-mail Service works The Fiery E-mail Service allows you to remotely print to and control the Fiery Chapter 10: using your current e-mail infrastructure. It allows you to print to remote locations Using Fiery and bypass firewalls. With E-mail Service, you can submit jobs to the Fiery as E-mail Service e-mail attachments.

  • Page 120: Printing Using An E-Mail Client

    10-2 Using Fiery E-mail Service Printing using an E-mail Client You can submit print jobs to the Fiery in the form of an e-mail attachment using your e-mail application. When you send an e-mail with an attachment, E-mail Service extracts the file and sends it to the Fiery Print queue. The file format must be one supported by the Fiery.
  • Page 121 10-3 Printing using an E-mail Client 4. Attach the file you want to print in the body of the e-mail. You can enter a additional text in the body of the message, if necessary. The text will also be printed. If your attachment exceeds the file size limitation set by your e-mail system administrator, the e-mail will not be sent.

  • Page 122: Job Control

    10-4 Using Fiery E-mail Service Job Control You can manage personal jobs when submitting them to the Fiery as an e-mail attachment using your e-mail application. You can cancel a job, check job status, and inquire help on a job. Once you send a command, the Fiery returns an e-mail response. O MANAGE PRINT JOBS WITH ONTROL 1.

  • Page 123: Printing Using The E-Mail Port Monitor

    1. Choose Print in your application. 2. Make sure the Fiery is selected as your printer and that you have set up the E-mail Port Monitor for the Fiery. 3. Click Properties. 4. Click the Fiery Printing tab. Fiery EX12...
  • Page 124 10-6 Using Fiery E-mail Service Fiery EX2000d 5. Set the print options and click OK. To set options using the printer driver, see “Setting options and printing from Windows” on page 1-2. Your job is sent to the Fiery. If the attachment exceeds the file size limitation set in your application, the attachment may be broken into several messages.

  • Page 125: Appendix A: Print Options

    A-1 Print Options Print options give you access to the special features of your copier/printer and Fiery. Appendix A: Print options can be specified in several places—in Fiery Setup, or from the printing Print Options application, Fiery Downloader, ColorWise Pro Tools, Command WorkStation, Fiery WebSpooler, or Fiery Spooler.

  • Page 126: Where To Set Print Options

    A-2 Print Options Where to set print options • During Setup Some settings are specified during Setup by the administrator. For information on the current default server settings, contact the administrator or the operator. • From applications With the Adobe PostScript printer drivers, you can specify job settings when you print a job.

  • Page 127: Print Option Override Hierarchy

    A-3 Print Options Print option override hierarchy The override hierarchy is as follows: • A user’s printer driver settings override the Fiery Setup and ColorWise Pro Tools settings. • Settings made from Command WorkStation, Fiery WebSpooler, or Fiery Spooler override the user’s printer driver settings. Default settings In the following tables, underlined settings in the “Option and settings”...
  • Page 128 A-4 Print Options EX12 printer options EX12 Option and settings Requirements, constraints, Description (default setting is underlined) and information Select Off if your job consists of black- Color Mode must be set to CMYK, Black Detection only text pages combined with a Standard Color, or Expert Color.
  • Page 129 A-5 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Select Quick to use one-dimensional The Printer’s default setting reflects the CMYK Simulation Method transfer curves to adjust density output of setting specified in Fiery Setup. Printer’s default/Quick/Full (Source individual color channels.
  • Page 130 A-6 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify the number of copies of the job to Do not enter a value greater than 999. Copies print. 1-999 To create a FreeForm master from this For more information, see page 5-2.
  • Page 131 A-7 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Set this setting to On to minimize grainy Image Smoothing output when printing low-resolution Printer’s Default/Automatic/Off/On images. Enter instructions to the operator about Instructions the job. Select Transparency if you will be Media Type (Paper Type) printing on transparencies.
  • Page 132 A-8 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify the output bin for your print job. Output Destination Printer’s default/SCT/OCT/Tray/ Bin 1-10 Select Forward to print the pages of your Page Order job from first to last. Forward/Reverse/Printer’s default Select Reverse to print the pages of your job from last to first.
  • Page 133 A-9 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify a default color rendering The Printer’s default setting reflects Rendering Style dictionary (CRD) to use when you print the setting specified in Fiery Setup. Printer’s default/Photographic/ RGB images, objects, and text.
  • Page 134 A-10 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify a scaling override for your This option is available only as an Scale print job. override from Fiery WebSpooler, Fiery 25-400% Spooler, and Command WorkStation. 100% For more information, see page...

  • Page 135: Ex2000D Printer Options

    A-11 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify if you want to sharpen the edges Text/Graphics Enhancement of text or vector graphics. On/Off For variable data print jobs, specify a For more information, see page 5-2.
  • Page 136 A-12 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify the simulation goal to be used for The Printer’s default setting reflects the CMYK Simulation Profile the current print job. setting specified in Fiery Setup. Printer’s default/SWOP-Coated/ For Windows, choose Expert Color as the DIC/Euroscale/Simulation-1/...
  • Page 137 A-13 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information When printing separations from a For more information, see the Combine Separations desktop publishing application: Color Guide. Printer’s default/On/Off/ Select On to combine separations on a single page.
  • Page 138 A-14 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Enter the Group Password specified for Group Password your group. Select Off to print your document on the The Media Type option must be Face-Down Printing top of the sheet.
  • Page 139 A-15 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Select Transparency if you will be Media Type (Paper Type) printing on transparencies. Uncoated 81-105gsm/ Uncoated 106-135gsm/ Uncoated 136-150gsm/ Uncoated 151-220gsm/ Uncoated/221-280gsm/ Coated 64-80 gsm/ Coated 81-105gsm/ Coated 106-135gsm/ Coated 136-150gsm/...
  • Page 140 A-16 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify a source phosphors value Setting this option to Printer’s default (Other) Phosphors for printing RGB images, objects, produces the same result as the SMPTE Printer’s default/Hitachi EBU/ and text.
  • Page 141 A-17 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Specify the size of the paper on which to Paper Size (Page Size) print the document. 8.5 x 11 Letter LEF/ 8.5 x 11 Letter SEF/ A4 LEF/ A4 SEF/ 8.5 x 14 Legal SEF/ 8.5 x 13 Legal 13 SEF/ 11 x 17/ A3 SEF/ 12 x 18/ SRA3/ 12.6 x 19.2...
  • Page 142 A-18 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Select Output for RGB jobs you are The Printer’s default setting reflects the RGB Separation printing to the final output device. setting specified in Fiery Setup. Printer’s default/Output/Simulation Select Simulation for RGB jobs for For Windows, choose Expert Color as...
  • Page 143 A-19 Print Options Option and settings Requirements, constraints, Description (default setting is underlined) and information Select Off to print specified PANTONE The Printer’s default setting reflects the Spot Color Matching colors in your job using the current setting specified in Fiery Setup. Printer’s default/Off/On CMYK Simulation and CMYK For Windows, choose Expert Color as the...

  • Page 144: More About Print Options

    A-20 Print Options More about print options The following sections provide additional information about print options. See the table in the previous section for information on the settings, requirements, and constraints in effect for these options. Collate EX12 Use this option to specify sorting options. —Copies of a complete job are output, uncollated, into the top tray.
  • Page 145 A-21 Print Options Duplex All duplex printing features are available only with plain paper media type. O PRINT DUPLEX PAGES 1. Choose Print in your application and locate the Duplex print option. The location of Fiery print options varies, depending on the printer driver you are using.
  • Page 146 A-22 Print Options Mixed Media EX2000d With the Mixed Media feature, you can print ranges of pages on different weights of media. You specify the Mixed Media print option when you print the job with the Fiery printer driver for Windows. For example, you can use this option to specify a different media type for the cover, add blank pages, and specify duplex pages within a single print job from the printer driver.
  • Page 147 A-23 Print Options 4. For each page range, enter the page numbers and specify the options for that range. You can choose your specifications from the following options: —This information is the default media type for the job. If a range uses this Body default media type, there is no need to list the range.
  • Page 148 A-24 Print Options 5. Click Add. Your specifications appear in the Selection List. 6. Repeat steps 4 and 5 for each page or page range you want to print with mixed media options. O MODIFY MIXED MEDIA SETTINGS 1. Choose Print in your application and click Properties. 2.
  • Page 149 A-25 Print Options O DELETE MIXED MEDIA SETTINGS 1. Choose Print in your application and click Properties. 2. Click the Paper Source print option bar, and then click Define. The Mixed Media dialog box appears. 3. Select the item you want to delete in the Selection List. 4.

  • Page 151: Appendix B: Font List

    B-1 Font List This appendix lists the built-in printer fonts included with your Fiery. Appendix B: Font List PostScript printer fonts The following table lists the 136 built-in PostScript printer fonts on the Fiery. In addition to these fonts, two Adobe Multiple Master fonts are included and used for font substitution in PDF files.
  • Page 152 B-2 Font List Windows menu PostScript name Mac OS menu name name, style ArialMT Arial Arial AvantGarde-Book Avant Garde AvantGarde AvantGarde-Demi Avant Garde Demi AvantGarde, Bold AvantGarde-BookOblique Avant Garde BookOblique AvantGarde, Italic AvantGarde-DemiOblique Avant Garde DemiOblique AvantGarde, Bold Italic Bodoni Bodoni Bodoni Bodoni-Bold...
  • Page 153 B-3 Font List Windows menu PostScript name Mac OS menu name name, style Eurostile-BoldExtendedTwo Eurostile BoldExtendedTwo Eurostile ExtendedTwo, Bold GillSans GillSans GillSans GillSans-Bold GillSans Bold GillSans, Bold GillSans-Italic GillSans Italic GillSans, Italic GillSans-BoldItalic GillSans BoldItalic GillSans, Bold Italic GillSans-Light GillSans Light GillSans Light GillSans-LightItalic GillSans LightItalic...
  • Page 154 B-4 Font List Windows menu PostScript name Mac OS menu name name, style JoannaMT Joanna MT Joanna MT JoannaMT-Bold Joanna MT Bd Joanna MT, Bold JoannaMT-Italic Joanna MT It Joanna MT, Italic JoannaMT-BoldItalic Joanna MT Bd It Joanna MT, Bold Italic LetterGothic Letter Gothic Letter Gothic...
  • Page 155 B-5 Font List Windows menu PostScript name Mac OS menu name name, style StempelGaramond-Italic StempelGaramond Italic StempelGaramond Roman, Italic StempelGaramond-BoldItalic StempelGaramond BoldItalic StempelGaramond Roman, Bold Italic Symbol Symbol Symbol Tekton Tekton Tekton Times-Roman Times Times Times-Bold Times Bold Times, Bold Times-Italic Times Italic Times, Italic...

  • Page 156: Truetype Fonts

    B-6 Font List Windows menu PostScript name Mac OS menu name name, style Univers-CondensedOblique Univers 57 Univers 57 Condensed, Italic CondensedOblique ZapfChancery-MediumItalic Zapf Chancery ZapfChancery ZapfDingbats Zapf Dingbats ZapfDingbats TrueType fonts The Fiery includes 10 TrueType fonts: Windows menu PostScript name Mac OS menu name name, style Apple-Chancery...

  • Page 157: Appendix C: Troubleshooting

    C-1 Troubleshooting This appendix provides troubleshooting tips. Appendix C: Troubleshooting Maintaining optimal system performance The Fiery does not require maintenance. Beyond the routine requirements of servicing and maintaining the copier/printer and replenishing consumables, you can improve the overall performance of your system by doing the following: •...

  • Page 158: General Printing Problems

    C-2 Troubleshooting General printing problems If this happens Try this You cannot connect to • Make sure the Fiery is not being calibrated from the Control Panel. a Fiery. If the Fiery is being calibrated from the Control Panel, you can select it in the Chooser, but you cannot connect to it.
  • Page 159 C-3 Troubleshooting If this happens Try this One or more Media Type • Select a Paper Source that supports the Media Type you are using. options are dimmed. For information on requirements and constraints pertaining to special papers and transparencies, see Appendix Fiery doesn’t respond to a •...

  • Page 160: Problems With Print Quality

    C-4 Troubleshooting Problems with print quality For information about printing with specific applications and optimizing color output, see the Color Guide. If this happens Try this Print settings for your job • Make sure you did not override the settings for the job in another place. output do not match the For information about options and overrides, see Appendix...

  • Page 161: Problems With Fiery Downloader

    C-5 Troubleshooting Problems with Fiery Downloader If this happens Try this General problems. • Make sure you are using the latest version. If you are updating your Fiery to new system software, delete the previous version of Fiery Downloader from your Windows or Mac OS computer and install the latest version to ensure full compatibility.

  • Page 162: Problems With Fiery Webtools

    C-6 Troubleshooting Problems with Fiery WebTools If this happens Try this General problems. • Clear the cache (Netscape Communicator) or history (Microsoft Internet Explorer).

  • Page 163: Index

    Index Index Adobe Photoshop DCS (Desktop Color scanning with 6-1 Separations) C-4 transfer functions 4-7 Direct connection Adobe Type 1 fonts B-1 downloading fonts 4-8 archiving jobs not in Chooser, Mac OS 2-2 in Hot Folders 8-10 required to download fonts C-5 Duplex option A-6, A-13, A-21 Black Detection option A-4, A-11 Black Overprint option A-4, A-11...
  • Page 164 I-2 Index Fiery WebTools control panel, displaying 8-4 accessing 9-1, 9-3 creating 8-4 home page 9-2 deleting 8-7 overview 9-4 disabling 8-7 problems with C-6 enabling 8-7 Status 9-3 imposition settings 8-12 WebLink 9-4 preferences 8-8 File name entry field 4-6 print options for 8-11 File port, saving files to 1-26 properties, assigning...
  • Page 165 I-3 Index Duplex option A-6, A-13, A-21 Media Type option A-7, A-15 orientation A-20 Page Order option A-8, A-16 (Other) Gamma option A-7, A-15 print settings A-2 (Other) Phosphors option A-7, A-16 Pure Black Text Graphics (Other) White Point option A-7, A-16 option A-8, A-17 Output Profile option A-7, A-16 Rendering Style option A-9, A-17...
  • Page 166 I-4 Index Print command (Windows) 1-1 print options Save Fast Reprint option A-9, A-18 assigning to Hot Folders 8-11 Saved Settings 1-9 Mac OS 2-3 to 2-6 Scale option A-25 saving sets of 8-11 scanning Windows 9x/Me/NT 4.0 from the copier glass 6-1, 10-1 1-2 to 1-7 from the document feeder 6-1 print quality, problems with C-4...
  • Page 167 I-5 Index UNIX BSD (Berkeley Software Distribution) variant of 3-4 displaying jobs in queue 3-3 printing with 3-1 removing jobs from queue 3-4 System V 3-3 Use Master option 5-2 WebLink, see Fiery WebTools WebTools, see Fiery WebTools White Point option A-7, A-16 Windows 9x/Me/NT 4.0 Notes fields 1-7 PostScript printer driver 1-2...

This manual is also suitable for:

Ex2000d

Table of Contents