6
6-1 Fiery Scan components
Chapter 6:
EX12
Scanning
With Fiery Scan, you can scan documents or images from the copier glass directly into
Photoshop on your computer or through the copier/printer's automatic document
feeder (ADF).
You can scan directly from the copier's control panel or from the Fiery display window.
You can also scan with Fiery Remote Scan. Fiery Remote Scan initiates the scan,
displays the scan in a host application, and then retrieves and sends the scan. You can
also use WebScan to retrieve a scan.
Scanning is only supported on the Fiery EX12.
N
:
OTE
The following requirements and constraints apply:
• Fiery Scan cannot be used over the parallel port; it requires a network connection.
For information on supported networking protocols, see the
Installation
Guide.
• The Fiery Scan must be installed as described in the
• Photoshop 5.0 RGB Setup should use EFIRGB ICC (Mac OS) or EFIRGB.icm
(Windows) settings. For information on loading this file, see the
Installation
Guide.
Fiery Scan components
Fiery Scan consists of the following software components and features:
• Fiery Remote Scan—includes the Fiery Scan 4.x TWAIN plug-in module. Fiery
Remote Scan allows you to remotely initiate and retrieve a scan from a remote
computer on the network to a copier.
• Fiery Scan application—appears on the Fiery Advanced Controller Interface, allows
you to initiate and send scan files taken from the copier.
• Scan to E-mail
• Scan to mailbox
• Scan to Hold queue for document merging and editing
• WebScan for mailbox retrieval using Fiery WebTools
User Software
User Software Installation
Guide.
User Software