Chapter 3: Printing From Unix Workstations; Printing To The Fiery - Fiery EX12 Printing Manual

3

3-1 Printing to the Fiery

Chapter 3:
Printing
from UNIX
Workstations
You can print to the Fiery directly from UNIX workstations. Jobs printed to the
Fiery are sent to the Print or Hold queue and can be manipulated from Command
WorkStation or from Windows and Mac OS computers on the network using
Fiery WebSpooler or Fiery Spooler.
If you print to the Hold queue, an operator must intervene from Command
N :
OTE
WorkStation, Fiery Spooler, or Fiery WebSpooler for the job to print; jobs sent to
the Hold queue are spooled to disk and held.
For more information about using Command Workstation, Fiery Spooler, or
Fiery WebSpooler, see the Job Management
The queue name and Fiery printer name are determined by your system administrator.
Contact your system administrator for the names of your queues.
For information about setting up printing from TCP/IP, see your UNIX system
documentation.
Printing to the Fiery
You can use UNIX commands to print PostScript and text files to the Fiery. In
general, use basic print commands (lpr, lpq, lprm) to send print jobs to the Fiery.
For information about UNIX commands, see the UNIX manual pages or other
documentation.
Only PostScript and ASCII text files can be printed from UNIX.
N :
OTE
Guide.