6
6-6 Scanning
Sending a scan to the Hold Queue for document merging and editing
When you send a scan file to the Hold queue, the Fiery automatically converts and
stores the file as a PDF on the Fiery hard disk. You can then manipulate the file using
DocBuilder Pro and Command Workstation. For information about using DocBuilder
Pro, see the
T
O SEND A SCAN FILE TO THE
1. In the Acquire Jobs dialog box, select the appropriate settings for your scan job and
click Send.
2. Select Fiery Hold Queue to save the file as a PDF in the local Fiery's Hold queue.
Scan to Mailbox
You can save the scan file to a four-digit mailbox on the Fiery hard disk drive.
T
O SEND A SCAN FILE TO A
1. In the Acquire Jobs dialog box, select the appropriate settings for your scan job and
click Send.
2. Select Fiery Mailbox.
3. Enter the Mailbox number.
4. Choose a File Format (JPG, PDF, or TIFF).
5. Click Send.
Job Management
Guide.
H
OLD QUEUE
F
IERY MAILBOX