Fiery EX12 Printing Manual page 48

3
3-2 Printing from UNIX Workstations
T UNIX
O PRINT FROM
• On a system running SunOS 4.1.x or another BSD-based variant, use the lpr command
to send a job to the Fiery, as follows:
lpr <-Pprinter> <-#copies> <filename>
For example, if the Print queue of your Fiery is named
Sample , and you want to print two copies, type:
lpr -Pprint_Server -#2 Sample
• On a system running Solaris 2.x or any System V implementation of UNIX, use the lp
command to send a job to the Fiery, as follows:
lp -d <printername> -n <copies> <filename>
For example, if the Print queue of your Fiery is named
, and you want to print two copies, type:
Sample
lp -d print_Server -n 2 Sample
print_Server , your file is named
, your file is named
print_Server