Fiery EX12 Printing Manual page 131

A
A-7 Print Options
Option and settings
(default setting is underlined)
Image Smoothing
Printer's Default/Automatic/Off/On
Instructions
Media Type (Paper Type)
Printer's default/Normal/Heavyweight/
Extra Heavyweight/Transparency/
Transparency Interleave
(Other) Gamma
Printer's default/1.0/1.2/1.4/1.6/
1.8/2.0/2.2/2.4/2.6/2.8/3.0
(Other) Phosphors
Printer's default/Hitachi EBU/
Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
(Other) White Point
Printer's default/5000 K (D50)/
5500 K/6500 K (D65)/7500 K/9300 K
Output Profile
Printer's default/Output-1/Output-2/
Output-3/Output-4/Output-5/
Output-6/Output-7/Output-8/
Output-9/Output-10
Description
Set this setting to On to minimize grainy
output when printing low-resolution
images.
Enter instructions to the operator about
the job.
Select Transparency if you will be
printing on transparencies.
Specify a source gamma value for
printing RGB images, objects, and text.
Specify a source phosphors value for
printing RGB images, objects, and text.
Specify a source white point value for
printing RGB images, objects, and text.
Specify the output profile to use for the
current print job.
Requirements, constraints,
and information
Setting this option to Printer's default
produces the same result as the
2.2 setting.
To enable this option, RGB Source
Profile must be set to Other.
For more information, see the
Color Guide.
Setting this option to Printer's default
produces the same result as the SMPTE
setting. To enable this option, RGB
Source Profile must be set to Other.
For more information, see the
Color Guide.
Setting this option to Printer's default
produces the same result as the 5000K
(DSO) setting.
To enable this option, RGB Source
Profile must be set to Other.
For more information, see the
Color Guide.
The Printer's default setting reflects the
setting specified in ColorWise Pro Tools.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see the
Color Guide.