6
6-16 Scanning
3. Choose PDF, TIFF, or JPEG as a File Format.
Multiple JPEG images in a single file are not supported.
N
:
OTE
4. Press the line selection button next to Exit Destination.
5. Press the line selection button next to Start Scan.
6. Enter a name for your job.
The default name is
The job is scanned and the file is sent to the Fiery hard disk. To retrieve the scan file,
see
"Retrieving scan files"
Hold queue, see the
T
O MANUALLY SEND A SCAN FILE TO A
1. After you have selected your settings, press the line selection button next
to Add Destination.
2. Press the line selection button next to Send to E-mail.
3. Press the line selection button next to Select Addresses.
4. Press the line selection button next to New Address.
Enter the e-mail address and select OK.
5. Choose Exit Email Address.
6. Press the line selection button next to Configure E-mail.
7. Choose Attachment or URL as a Document Format.
8. Choose PDF, TIFF, or JPEG as a File Format.
Multiple JPEG images in a single file is not supported.
N
:
OTE
.
MMDDHHMM
on page 6-8. For information on retrieving jobs sent to the
Job Management
Guide.
F
-
IERY E
MAIL ADDRESS