Enabling And Disabling Hot Folders - Fiery EX12 Printing Manual

8
8-7 Using the Hot Folder Control Panel
T H F
O DELETE A OT OLDER FROM YOUR COMPUTER
1. In the Hot Folder Control Panel, select the folder you want to remove.
Make a note of the folder's directory path.
2. If the folder is not already disabled, click Disable.
You must disable a folder before you can remove it.
3. Click Remove.
The folder is removed from the Control Panel.
4. Click OK to close the Hot Folder Control Panel.
5. Locate the Hot Folder on your computer, and make sure the folder does not contain
any archived jobs you want to retain.
For information about using the subfolders to store archived jobs, see
Hot Folder settings"
6. Delete the folder by dragging it to the Recycle Bin or choosing Delete from the
File menu.

Enabling and disabling Hot Folders

By default, the Hot Folder application continuously monitors all your folders for new
jobs. You can choose to disable a folder to prevent it from being monitored. Any jobs
you send to a disabled folder remain unrecognized by the Hot Folder application until
you enable the folder again.
T
O TOGGLE THE ACTIVITY STATE OF A FOLDER
• In the Hot Folder Control Panel, select the folder you want and click Enable or Disable.
or
• Right-click the Hot folder you want on the desktop. Choose EFI HotFolders >Disable
HotFolder or EFI HotFolders >Enable HotFolder from the menu that appears.
or
• Right-click the Hot Folder you want and choose Properties from the menu that
appears. Click the EFI Hot Folder tab and select Enable Hot Folder or Disable
Hot Folder.
on page 8-9.
"Customizing