Fiery EX12 Printing Manual page 133

A
A-9 Print Options
Option and settings
(default setting is underlined)
Rendering Style
Printer's default/Photographic/
Presentation/Relative Colorimetric/
Absolute Colorimetric
RGB Separation
Printer's default/Output/Simulation
RGB Source Profile
Printer's default/EFIRGB/sRGB (PC)/
Apple Standard/Other/Source-1/
Source-2/Source-3/Source-4/Source-5/
Source-6/Source-7/Source-8/Source-9/
Source-10/None
Rotate 180°
Yes/No
Save Fast Reprint
Off/On
Description
Specify a default color rendering
dictionary (CRD) to use when you print
RGB images, objects, and text.
Select Output for RGB jobs you are
printing to the final output device.
Select Simulation for RGB jobs for which
you want to simulate an output device
that is not the device to which you are
printing.
Specify a source color space definition for
printing RGB images, objects, and text.
Specify if you want to rotate the pages of
your job 180 degrees.
Specify whether to save a job's raster data
to disk after printing, so the data will be
available later for reprinting (without
reRIPping).
Requirements, constraints,
and information
The Printer's default setting reflects
the setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see the
Color Guide.
The Printer's default setting reflects the
setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
The Printer's default setting reflects the
setting specified in Fiery Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see the
Color Guide.
This option is only available from
Mac OS. For Windows, use the
Orientation option.
Depending on the application you are
using, your landscape job may print with
the incorrect orientation; if this occurs, or
if you select a Stapler Mode (other than
Off ) and the staple is inserted in the
wrong place, select Yes.
With Save Fast Reprint set to On, all
print option settings remain with the
saved raster data each time the job is
reprinted. To print the job with new print
option settings, you must remove the
raster data and reRIP the job.