Wolf CT15E/S Design Manual page 86

WOLF COOKTOP VENTILATION
Planning Information
Wolf cooktop low-profile hoods are recommended for use
with Wolf induction, electric and gas cooktops and inte-
grated modules. These hoods have a telescopic chimney
flue that accommodates ceiling heights from 8'
with a finished look.
(2.7 m)
Low-profile wall and island hoods are available with an
internal blower. Models CTEWH36 and CTEWH45 require
an in-line or remote blower assembly, avail able through your
authorized Wolf dealer. For local dealer information, visit the
find a showroom section of our website, wolfappliance.com.
The blower will vary in size and is dictated by the cooking
unit, the volume of air that needs to be moved and the
length of the duct run. Refer to ventilation recommendations
on pages 96–99. These hoods include a 6"
with vertical discharge.
Cooktop low-profile hoods that include an internal blower
can be used in a non-ducted application with a recirculating
filter. In this installation, kitchen air is purified through filters
and returned as clean air into the room. A recirculation kit
available through your authorized Wolf dealer is required.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
ELECTRICAL
ELECTRICAL REQUIREMENTS
LOW-PROFILE HOOD
Electrical Supply
Service
|
86 Wolf Customer Care 800.222.7820
to 9'
(2.4 m)
round duct
(152)
grounded, 110/120 VAC, 60 Hz
15 amp dedicated circuit
Installation
WALL HOOD
E
5"
(127)
24" 30"
(610) TO (762) BOTTOM EDGE TO COUNTERTOP
ISLAND HOOD
ELECTRICAL LOCATION
THROUGH TOP OF HOOD
24" 30"
(610) TO (762) BOTTOM EDGE TO COUNTERTOP
15"
(381)