Wolf CT15E/S Design Manual page 83

WOLF COOKTOP VENTILATION
Planning Information
Wolf cooktop ventilation hoods are recommended for use
with Wolf induction, electric and gas cooktops and inte-
grated modules. These hoods have a telescopic chimney
flue that accommodates ceiling heights from 8'
. A flue extension to accommodate 10'
(2.7 m)
available through your authorized Wolf dealer.
Wall and island hoods are shipped without a blower
assembly. Internal, in-line and remote blowers are avail able
through your authorized Wolf dealer. For local dealer infor-
mation, visit the find a showroom section of our website,
wolfappliance.com.
The blower will vary in size and is dictated by the cooking
unit, the volume of air that needs to be moved and the
length of the duct run. Refer to ventilation recommendations
on pages 96–99. These hoods include a 8"
with vertical discharge.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
ELECTRICAL
ELECTRICAL REQUIREMENTS
COOKTOP HOOD
Electrical Supply
Service
to 9'
(2.4 m)
ceilings is
(3 m)
round duct
(203)
grounded, 120 VAC, 60 Hz
15 amp dedicated circuit
Installation
WALL HOOD
9"
(229)
6"
E
(152)
4"
(102)
24" 30"
(610) TO (762) BOTTOM EDGE TO COUNTERTOP
ISLAND HOOD
ELECTRICAL LOCATION
THROUGH TOP OF HOOD
24" 30"
(610) TO (762) BOTTOM EDGE TO COUNTERTOP
|
wolfappliance.com 83