Monster Vision max 3D Owner's Manual page 5

11. Power Cord Protection – Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against them, paying particular attention
to cords at plugs, receptacles, and the point where they exit from the appliance.
12. Cleaning – The appliance should be cleaned only as recommended by the manufacturer.
13. Non-Use Periods – The power cord of the appliance should be unplugged from the outlet when
left unused for a long period of time. To remove all power (supply mains) from the appliance,
remove the plug from the wall outlet.
14. Object and Liquid Entry – Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through the openings.
15. Damage Requiring Service – The appliance should be serviced by qualified service
personnel when:
a. The power supply cord or the plug has been damaged; or
b. Objects have fallen, liquid has been spilled into the appliance; or
c. The appliance has been exposed to rain; or
d. The appliance does not appear to operate normally; or
e. The appliance has been dropped or the enclosure is damaged.
16. Servicing – The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualified service personnel.
i.ii PRECAUtiONS
1. Power –
WARNiNG:
FOLLOWING SECTION CAREFULLY.
2. Do Not Touch The Unit With Wet Hands – Do not handle the unit or power cord when your hands
are wet or damp. If water or any other liquid enters the cabinet, unplug the unit from power
immediately and take it to a qualified service person for inspection.
3. Location of Unit – Place the unit in a well-ventilated location. Take special care to provide plenty
of ventilation on all sides of the unit especially when it is placed in an audio rack. If ventilation
is blocked, the unit may overheat and malfunction. Do not expose the unit to direct sun light or
heating units as the unit internal components temperature may rise and shorten the life of the
components. Avoid damp and dusty places.
4. Care – From time to time you should wipe off the front and side panels of the cabinet with a soft
cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since this
may damage the finish or remove the panel lettering.
WARNiNG – FiRE AND iNjURy
DO NOT puncture, pierce, damage, destroy, or modify the battery contained in the glasses.
Puncturing the battery may result in combustion or a fire, which could lead to severe burns
and injury. DO NOT expose the battery to hot or cold temperature extremes. If there are any
signs of damage to the battery, discontinue use of the glasses immediately.
BEFORE TURNING ON THE POWER FOR THE FIRST TIME, READ THE
3