Eyewear Updates - Monster Vision max 3D Owner's Manual

6. Once the firmware file has opened, the
Upgrade button is now active, click on the
upgrade button to update the firmware.
7. During the process a status window
will appear verifying that firmware
is being updated.
8. After a short time the firmware is updated
and verified by the appearance of a
window that says Upgrade is Complete.

6.2 EyEWEAR UPDAtES

Firmware for the Eyewear is updated via the transmitter, when the firmware in the transmitter is
updated it also contains updated firmware for the Eyewear. When the Eyewear is turned on and
syncs with the transmitter it automatically downloads new firmware.
During this process the LED will blink rapidly as the firmware is being updated, once the update
is complete the Eyewear will be ready for use.
It is recommended that after updating the firmware in the transmitter that the Eyewear
is powered on so that the update can take place. This will ensure that the Eyewear is ready
to go the next time it is used...
28