Monster Vision max 3D Owner's Manual page 16

After Restoring Defaults
Firmware reverts to its original version – The Eyewear will reinstall new firmware once it syncs
with the transmitter.
Eyewear returns to an un-paired state – If the Eyewear was previously paired to a transmitter
the pairing will need to be re-established.
To Restore a Pair of Glasses to Factory Defaults
1. Press & hold the power button.
2. Continue holding the power button for around 10 seconds until the LED blinks
in a heartbeat indicating pairing mode.
3. Continue holding the power button for around 10 more seconds until the LED starts
blinking rapidly.
4. Release the power button within 20 seconds.
NOtE: IF the button is not released within 20 seconds of the start of rapid LED blinking
the Eyewear will power off.
The MAX 3D Eyewear unit will restore its factory default settings and firmware. This can take
several seconds. After the process is complete, the unit will resume normal operation.
14