Transmitter Operation; Max3D TranSmitter OperationS - Monster Vision max 3D Owner's Manual

2

transmitter oPeration

2.1 MAX 3D tRANSMittER OPERAtiON
RF Communication of Synchronization Signal
Advanced RF communications enable the MAX 3D System to provide an extraordinary 3D
viewing experience that is uninterruptable. Unlike IR-based 3D systems where the quality
of the viewing experience is highly susceptible to line of sight obstructions, placement of
transmitter considerations, and where the viewer sits relative to the transmitter; issues
of sync between the MAX 3D Transmitter and MAX 3D Eyewear never arise thanks to the
advanced RF technology used by the MAX 3D System.
LED Indicators
The MAX 3D Transmitter uses 5 multicolored
LEDs to indicate modes of operation or other
information. The LEDs are located on the top of
the transmitter close to the joystick. The colors
they display are red, green, or orange.
Joystick
With the MAX 3D Transmitter, you can access
different modes of operation and make changes
to various settings. The joystick has two axes
UP
and a center button function. How the transmitter
LEFT PRESS RIGHT
functions along an axis and what the button will
do depends on its current operating mode.
DOWN
Modes of Operation
The MAX 3D Transmitter operates in 5 different modes:
• Normal
• IR Signal Strength
• Manual Performance Tuning of Eyewear
• Pairing MAX 3D Transmitter with MAX 3D Eyewear
• IR Signal Search and Learning
9