Table of Contents
Advertisement
Accessing Modes
• During normal operation, the
joystick is used to access different
modes of operation.
• Press & hold the joystick to the left
to cycle through the available modes.
• Once the desired mode is indicated,
release the joystick to select a mode.
• In any mode, the normal mode of
operation resumes after 60 seconds
of inactivity.
Normal Operation
During normal operating mode, the MAX 3D Transmitter interprets signals from
the 3D TV and controls the MAX 3D Eyewear through RF.
Transmitters using 3D Emitter Connection: A Single LED will be illuminated.
Transmitters using IR 3D Sync Connection: Indicate IR signal strength.
IR Signal Strength Indicator
The signal strength indicator provides a visual measurement of IR signal quality.
Use this mode to determine the ideal location for placing the MAX 3D IR Sensor. The
number of lit green LEDs indicates the quality of the IR signal where more means better.
Weak Signal:
Manual Performance Tuning
The MAX 3D Transmitter and MAX 3D Eyewear are preprogrammed to work with
a wide variety of 3D TVs and 3D content types. Manual performance tuning enables
you to fine-tune the performance of the MAX 3D System.
NOTE: Uninformed use of this feature can yield improper or undesired results.
Pairing Transmitter and Eyewear
In environments where more than one MAX 3D Transmitter is present, MAX 3D
Eyewear should be paired with a specific MAX 3D Transmitter to ensure proper
operation. See the section 4.4.1 for more information about MAX 3D Eyewear
and this operating mode.
10
Strong Signal:
Hide quick links:
Advertisement
Table of Contents
