Fine Tuning Performance - Monster Vision max 3D Owner's Manual

5

fine tUning Performance

While the Vision Max3D Eyewear performs at a high level with the standard settings, some situations may
call for more performance. For this reason the Max3D transmitter has a manual performance mode that
allows you to tweak settings to get the optimum performance from the Eyewear.
Fine tuning is performed using the joystick while the transmitter is in fine tuning mode; you should be
a good distance from the TV usually in the normal seating area. Seeing as the transmitter is placed
close to the TV, having a second person on hand to operate the joystick is advisable and makes fine
tuning go quickly and accurately.
NOtE: Any adjustment made during fine tuning will be erased after performing a Factory Reset.
WARNiNG: Uninformed use of Fine Tuning can yield improper or undesired results. Should
these items be adjusted improperly the performance of the eyewear will be degraded and
can cause eyestrain. Should this occur discontinue use of the eyewear and restore the
eyewear to factory defaults.
Manual Performance Tuning places the eyewear into a mode where one eye sees a
WARNiNG:
double image consisting of both the left and right image. This can cause eyestrain after prolonged
viewing in this mode. If you experience eyestrain, discontinue using the product immediately.
To minimize the chances of eyestrain during fine tuning:
• Open only one eye at a time
• After each eye sees a unique image, briefly open both eyes at the same time to check polarity
21