Sharp Conference Series XG-PH80W-N Operation Manual page 29

When connecting to the LAN terminal using a LAN cable
Note
• When you establish the connection shown above, set "LAN/RS232C" in "Ex. Setting" of the "PRJ-
ADJ" menu to "LAN".
• When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially
available).
• When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially
available).
TX/RX LED (yellow)
Illuminates when transmitting/receiving data.
LINK LED (green)
Illuminates when linked.
* To ensure safety, do not connect the LAN
terminal with any cables that may cause
excessive voltage such as a telephone line.
To LAN terminal
LAN cable (Category 5 type,
commercially available)
Hub
or
Computer
25