Information On The 3D Projection Function - Sharp Conference Series XG-PH80W-N Operation Manual

Viewing Stereoscopic 3D Images (Continued)

Information on the 3D Projection Function

To display 3D images, this projector requires:
WHAT YOU WILL NEED
1) Source devices that support the field sequential format
– For details on the supported signals, see the Compatibility Chart in this operation
manual.
2) 3D LCD shutter glasses that support the DLP
– Contact your nearest Sharp Authorized Projector Dealer for purchasing details.
®
* DLP Link™ is a trademark of Texas Instruments.
The projected image may become dark when using the 3D projection function (with "DLP
Link™ " set to "On").
When "DLP ® Link™" is set to "On", the following functions may not work fully or may not be
available at all.
– Keystone
– Resize
– Image Resizing
3D formats except for the field sequential method, such as ones used for Blu-ray 3D or DVD
prepackaged media, are not compatible with this projector. (As of February 2011)
If the power of your left and right eyes greatly differs and you primarily use one eye for
viewing the images, the images will not appear in 3D.
In addition, images may be difficult to view in 3D or images may not be able to be viewed in
3D depending on the individual or the content being displayed.
The stereoscopic effect varies with the individual.
3D viewing is possible within the range that the 3D LCD shutter glasses are able to receive
light signals reflected by the screen. However, most 3D images are manufactured to be
viewed from directly in front of the screen, so 3D viewing is recommended directly in front of
the screen as much as possible.
– The range for receiving signals varies depending on the 3D LCD shutter glasses. For
details, see the operation manual of your 3D LCD shutter glasses.
3D images may not be able to be played back correctly on your computer.
58
® Link™* system
®