Input Memory Saving; Input Memory Calling/Deleting - Mitsubishi Electric DLP PH50 series Manual

1.7.6. Input memory saving

The adjusted values can be saved in an input memory. The number of the memories is 128.
Be sure to save when you change the values. Even if the same resolution has already registered
in a memory, save the new adjusted values in another input memory if some menus such as
FINE or POSITION have different values from the existing memory.
[Procedure]
1. Press [ESC] button during the input memory menu displaying. In reply to "SAVE THE
CHANGES?" message, press [ENTER] button. You can exit the menu by [ESC] button
without saving.
2. Designate a memory number to save in by left/right buttons and press [ENTER] button.
3. The current setting will be saved in the memory if the number is unregistered. When it has
already been registered, the overwrite confirmation message will be displayed.

1.7.7. Input memory calling/deleting

Registered input memories can be called or deleted when needed.
•
Call: Press [MEM LIST] button to select INPUT MEMORY. Designate a memory number to
be called by left/right buttons and press [ENTER] button.
•
Delete: Press [MEM LIST] button to select INPUT MEMORY. Designate a memory number
to be deleted by left/right buttons. Select DELETE MEMORY by up/down buttons and press
[ENTER] button in reply to "DELETE OK?" message.
65
REV 2.4