Serial Port Menu; Special Menu; Help Menu - Mitsubishi Electric DLP PH50 series Manual

4.7.5. Serial Port menu

4.7.5.1. Log...
Used to display a communication log window.
4.7.5.2. Open
Used to switch open/close the serial port in the control PC.
4.7.5.3. Port Setting
Used to set the serial port in "Port Setting" window. The COM
port number and the baud rate can be set.

4.7.6. Special menu

4.7.6.1. Protect Setting
Used to set a new password or invalidate the
password for entering the Service tab in "Protection
of 'Service' tab" window. If you don't use the
password protection in Service tab, check "Without
protection of 'Service' tab".

4.7.7. Help menu

4.7.7.1. Wallaby Help
Used to display the help file.
4.7.7.2. About Wallaby
Used to display the software version information etc.
117
REV 2.4