Table of Contents
Advertisement
6. Revision history
• Add product lineup, VS-67PH50U, VS-67XLWF50U and VS-67XLF50U.
• In chapter 1.2.6.3.1, add the direction to block some vents in
• In chapter 1.5.1.15, add CUSTOM menu in CABLE LENGTH.
• Add product lineup, VS-50XLWF50U.
• In chapter 1.8.2 and 1.8.4, add the notice of tweaking at an unmatched image linkage
between screens.
• In chapter 3.7, add several signals for VC-B50KA.
• Add product lineup, XL50 series.
• In chapter 2.4.3.1, add the direction to check correct working of external AC fans when
"CHECK FILTER" indication appears.
• On page 17, change the condition of when to attach the optional AC fan.
• Add product lineup, VS-50PH50U and VS-67PH50U.
• Add chapter 0, "External AC fan attaching".
• Add chapter 1.5.1.17, "DIRECTION" menu.
• Add chapter 4.3.1, "Model selecting".
• Add chapter 4.4.6, "Memory copy".
• Add chapter 4.5, "Memory backup".
• Add product lineup, VS-50XL21U, VS-67XL21U and VS-67XLW20U.
• In chapter 3.5, add error code "2.".
• In chapter 3.8.1, add applicable products to motorized adjustment tool.
• In chapter 4, add explanation of new function in Wallaby version 2.1. (Up to 64 cubes can
be controlled. Hot Exchange, Mechanical Alignment, Auto CSC, Filter Time and Filter Reset
functions.)
• Add product lineup, VS-50XLF20U.
• In chapter 1.4.1.3, add explanation of press-and-hold [R], [G], [B] button.
• In chapter 1.4.2, change the function of dipswitch No. 2.
• Add chapter 1.5.1.14, "EXTENDED ID".
• In chapter 1.5.1.18, add "HOT EXCHANGE" menu.
• Add chapter 4, "Adjustment software, "Wallaby"".
• Add chapter 3.8, "Motorized adjustment tool specification".
• Add product lineup, VS-50XLW20U.
• In chapter 2.2, delete the direction to set SENSOR OFF before condenser lens adjustment.
• Add chapter 3.6, "Terminal functions".
• Move "Connecting" to chapter 1.3.
• In chapter 1.5.2.1, the value in WHITE BALANCE was "MIDDLE".
• In chapter 3.2.1.1, the range of H.SIZE and V.SIZE were "640 – 1920" and "350 – 1200".
• In chapter 1.5.2.7, change the procedure of "Color balance readjustment after SENSOR
RUN".
• In chapter 3.2, add reference page in each menu item.
• Separate "SYNC SELECT" from "CLAMP" as chapter 1.6.3.10.
• In chapter 2.2, add the direction to set WHITE BOOST OFF before condenser lens
adjustment.
• In chapter 1.7.5.6, add the direction to set SCALING FILTER "0" when displaying
high-resolution image.
• In chapter 1.2.3, add the directions to turn off the main power switch and to stick the label.
• In chapter 1.6.2, change the procedure of input signal selection.
• In chapter 1.7.5.10, add VCR MODE menu.
Issue first edition (REV1.1)
Description
5
0
"
5
0
"
119
C
h
a
n
g
e
r
F
r
o
n
t
.
C
h
a
n
g
e
r
F
r
o
n
t
Revision date
March 09, 2007
(REV 2.4)
November 06, 2006
(REV 2.3)
November 02, 2005
(REV 2.1)
August 05, 2005
(REV 2.0)
September 03, 2004
(REV 1.7)
March 30, 2004
(REV 1.6)
January 22, 2004
(REV 1.5)
October 10, 2003
(REV 1.4)
August 22, 2003
(REV 1.2)
July 04, 2003
REV 2.4
Hide quick links:
Advertisement
Table of Contents
