4.4.4. Memory tab
Registered memories can be called or deleted in the memory tab.
1. Select panels to call the memory.
2. Input a memory number to be called in "Memory No." and click "Call" button.
Or you can also call it by double-clicking the memory number in the list box.
To delete a memory, select the memory in the list box and check "Delete" in the right-click menu.
With remote control
INPUT MEMORY
DISPLAY MEMORY
•
"Memory List" button can update the memory list.
•
"Automatically read parameters" can automatically update the selected memory data in the
software for synchronization with the cubes whenever you call the memory. Even if
unchecked, you can update it later according to the "Data reading" on page 101.
4.4.5. Information tab
It displays current status information of a selected cube.
•
"Timer Reset" button has the same function as "Reset" button in "Maintenance" in Service
tab (on page 102).
•
"Filter" menu appears only in
used hours (on page 84) can be reset by the "Filter Reset" button.
PH50, XL50, XL21 series Set-up and Installation Manual
Wallaby menu
Input Memory
Display Memory
F
r
o
n
t
or when DIRECTION menu is set FRONT. The filter
F
r
o
n
t
110
Page
56, 65
68