System Config Menu; Test Patterns Menu - Mitsubishi Electric DLP PH50 series Manual

4.7.3. System Config menu

4.7.3.1. n by n (1x1, 2x2, 3x3 or 4x4)
Used to select vertical and horizontal screen numbers in
a display wall.
4.7.3.2. Other Wall Config...
Used to set the screen numbers in "Wall Configuration" window, except 1 by 1, 2 by 2, 3 by 3 or 4
by 4.
Note: Maximum number to be set is 64 screens.
4.7.3.3. Cube ID Setting
Used to set panel IDs manually in "Cube ID" window.
4.7.3.4. Auto ID
Used to allocate available ID numbers to the active panels automatically in a
sequential order from the upper left cube.

4.7.4. Test Patterns menu

Used to display test patterns. Selecting OFF stops the test pattern display.
PH50, XL50, XL21 series Set-up and Installation Manual
116