Using The Remote Control - Mitsubishi Electric DLP HC7800D User Manual

Using the remote control

Operational range of the remote control
Front of projector
30° 30°
Operate the remote
control within a
distance of 10 m (30
feet) from the projector,
pointing the IR beam
at the remote control
photo-sensor (front or
rear) of the projector.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Rear of projector
30° 30°
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
20°
10°
20°
EN-9
• Keep the remote control photo-sensor out of direct
sunlight or fluorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
(6 feet) away from fluorescent lamps. Otherwise,
the remote control may malfunction.
• If there is an inverter-operated fluorescent lamp
near the remote control, the remote control
operation may become unstable.
• When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
• A remote control may operate improperly while
you watch the 3D images. However, it is not a
malfunction.
• When a remote control operates improperly
while you watch the 3D images, switch REMOTE
POSITION in the FEATURE menu to FRONT or
REAR.
20°
10˚
20°