Mitsubishi Electric DLP HC7800D User Manual page 26

Viewing 3D images (continued)
3D images viewing
This projector is able to display the following 3D
display supporting broadcasts and signals as
stereoscopic images. (As of January, 2011)
• 3D images input from the recorder/player
supporting 3D display. (Side by side, top and
bottom, and frame packing)
• 3D images by the digital terrestrial broadcasting
and BS digital broadcasting. (Side by side) (For
viewing 3D images with CATV (cable television),
please consult CATV broadcasters or CATV
providers.)
(For details about the supported 3D image signal
formats, see "3D supported signals" on page 59.)
This projector is also able to display 3D images
converted from 2D images.
To view 3D images:
Preparation:
• Please read the 3D glasses user manual carefully
opt.
before viewing the 3D images.
• Switching the 3D mode (such as 3D setting system) IMAGE
of the recorder/player may be required when
PICTURE MODE
projecting 3D images from the recorder/player
GAMMA MODE
supporting 3D display. Read the user manual of the
CONTRAST
recorder/player for details.
BRIGHTNESS
1. Project a 3D image on the screen.
COLOR TEMP.
2. Display the IMAGE menu.
COLOR
(See page 29 for menu setting.)
TINT
SHARPNESS
3. Select 3D by pressing the p or q button.
BrilliantColor
TM
3D
ADVANCED MENU
4. Set 3D to ON by pressing the t or u button.
• The projector will be ready to display 3D
images.
5. Turn the power switch on the 3D glasses to ON.
6. Wear the 3D glasses.
• Now you are ready to view 3D images.
To change the 3D viewing mode:
When 3D images aren't displayed properly, change the
following setting using the menu.
(See page 29 for menu setting.)
1. Display the IMAGE menu and set the 3D option to
ON .
2. Press the ENTER button.
• The 3D menu will appear.
3D
3D MODE
3D SYNC.
2D-3D
CONVERSION
3D DEPTH
CINEMA
CINEMA
0
0
MEDIUM
0
0
0
ON
OFF
OK
AUTO
NORMAL
ON
5
EN-26
3. Press the p or q button to select the desired item
and press the t or u button to select the desired
option.
3D MODE
If 3D images aren't displayed properly with
AUTO selected, select the video format (FRAME
PACKING, SIDE BY SIDE, or TOP AND BOTTOM)
suitable for the 3D image being displayed.
Alternatively, you can select the video format using
the 3D MODE button on the remote control.
3D SYNC.
If you feel uncomfortable while viewing 3D images,
the right-left synchronization between the 3D image
and the 3D glasses (LCD shutter) may be lost. In
such a case, set 3D SYNC. to REVERSE.
To convert 2D images to 3D images:
1. Project a 2D image.
2. Perform steps 2 to 4 in the section "To view 3D
images."
3. Press the ENTER button.
• The 3D menu will appear.
4. Select 3D MODE by pressing the p or q button.
3D
3D MODE
3D SYNC.
5. Set 3D MODE to AUTO by pressing the t or u
2D-3D
CONVERSION
button.
3D DEPTH
3D
6. Select 2D-3D CONVERSION by pressing the p or
3D MODE
q button.
3D SYNC.
2D-3D
CONVERSION
3D DEPTH
7. Set 2D-3D CONVERSION to ON by pressing the t
or u button.
• Now 2D images are converted into 3D images.
3D
8. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
3D MODE
3D SYNC.
9. Select 3D DEPTH by pressing the p or q button.
2D-3D
CONVERSION
3D DEPTH
10. Adjust the depth of the converted 3D images by
pressing the t or u button.
• You can select the depth from 10 levels (1 to
10). As the level increases, the appearance of
depth is enhanced.
• 3D images converted from 2D images appear
blurred due to conversion.
• To finish the conversion to 3D images, set 2D-
3D CONVERSION back to OFF.
AUTO
NORMAL
ON
5
AUTO
NORMAL
ON
5
AUTO
NORMAL
ON
5