Feature Menu - Mitsubishi Electric DLP HC7800D User Manual

Menu operation (continued)

FEATURE menu

ITEM SETTING
ASPECT AUTO
4:3
16:9
ZOOM1
ZOOM2
STRETCH
ANAMORPHIC1
ANAMORPHIC2
PASSWORD FUNCTION 2 options
MENU POSITION 2 options
MENU DIMMER ON / OFF
CINEMA MODE AUTO
VIDEO
FILM
REMOTE POSITION AUTO / FRONT /
REAR
LANGUAGE 10 languages
OK
RESET ALL
• When SCREEN SIZE of ADVANCED MENU is set to CINEMA SCOPE (2.35:1) in the IMAGE menu, STRETCH
cannot be selected for ASPECT.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
opt.
FEATURE
ASPECT
PASSWORD
FUNCTION
MENU POSITION
MENU DIMMER
CINEMA MODE
REMOTE POSITION
A LANGUAGE
Ë
RESET ALL
FUNCTION
Select to change the aspect ratio automatically depending on the input
signal.
Select to project images with an aspect ratio of 4:3.
Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
Select to enlarge and project images of CinemaScope size.
Select to enlarge and project images of Vista size.
Select to enlarge to 16:9 and project of the images with an aspect ratio of
4:3. (Non-linearly stretched.)
This mode is suitable for viewing 2.35:1-size images using the anamorphic
lens.
Use the p or q key to adjust the vertical display position.
This mode doesn't support input signals from personal computers.
This mode is suitable for viewing 16:9- or 4:3-size images or images input
from personal computers using the anamorphic lens.
Use to enable or cancel the password lock. See page 41 for details.
Use to change the position of the menu.
Use to reduce the brightness of the menu.
The film mode will be automatically activated when a film source signal is
input.
Select AUTO for normal use.
When flicker occurs on the screen or jaggies on slanting lines are
remarkable, select FILM when a film source signal is input or select VIDEO
for other signals.
The film mode will not be activated.
Fixed to the film mode.
Sets the position of remote infrared receiver to front or rear.
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding PASSWORD FUNCTION,
LANGUAGE, and NETWORK) to the factory setting values.
EN-33
AUTO
DISPLAY
INPUT
1.
OFF
AUTO
AUTO
English
OK