Table of Contents
Advertisement
Installing the Model 8602
The Model 8602 application software is supplied on CD-ROM.
The following installation instructions assume that Windows XP is installed on your
computer and that you are familiar with Windows procedures.
To install the Model 8602:
The user's Windows account must have the privileges to create a new directory
in the file system and write/copy files into it. Also, the Window's account must
NOTE
have the permission to write to the registry. Contact your System Administrator
if you have any questions about privileges and permissions of your Windows
account.
1.
Start the computer and close all other Windows applications.
2.
Insert the Inter-Tel 8602 installation CD into the drive. The setup wizard
automatically begins.
If the setup wizard does not begin:
a. Select Start – Run.
b. Type the CD drive location (usually E) followed by :\_setup (e.g., E:\_setup), in the
text box.
c. Click OK.
3.
Select Install Inter-Tel Application. The installation wizard begins.
4.
Follow the wizard installation directions by clicking Next to advance to the next
screen.
NOTE
5.
Click Close to complete the installation.
6.
Click Exit Installation and remove the CD-ROM from the drive.
7.
If prompted, restart the computer.
NOTE
®
Inter-Tel
Model 8602 User Guide
If you want to exit the setup program without completing the installation,
click ESC or click Cancel. Then click Exit Setup when the dialog box
appears. This stops the setup program and returns you to the first
screen.
If this is the first time installing the Model 8602, the Configuration Wizard
automatically starts after installation. You must complete the wizard
before the IP softphone will operate. See the next page for details on the
"Configuration Wizard" on
page
6.
5
Advertisement
Table of Contents
