Feature Access Codes - Mitel SUPERSET 410 Manual

FEATURE ACCESS CODES

What are Feature Access Codes
Certain telephone features are activated or disabled
by Feature Access Codes, when no Feature Key is
programmed for that feature. To activate a feature
while in a call, press TRANS/CONF and then dial
the access code for that feature. To activate a feature
when your set is idle, lift the handset and then dial
the access code for that feature.
Feature access codes are set by your
Communications Department.
List of Feature Access Codes
You can use this table to record the feature access
codes you are most likely to need on your telephone
set.
Feature Access Code
Account Code Access
Callback- Setup
- Cancel All
- Cancel Individual
Call Fwd- Busy (Ext Src)
- Busy (Int Src)
- Busy (Both)
- No Answer (Ext Src)
- No Answer (Int Src)
- No Answer (Both)
Feature Access Code
- Follow Me
- I Am Here
- Cancel All
Call Hold
Call Hold Retrieve
Call Hold Remote Retrieve
Call Pickup
Directed Call Pickup
Camp-On Setup
Camp-On Retrieve
Clear All Features
Do Not Disturb
Cancel Do Not Disturb
External Line Access
Override
Paging
Speed Call- Store
- Invoke
Tone Demonstration
PERSONAL KEY LISTING
List of Programmed Personal Keys
The first Personal Key (lower right—hand key) is your
Prime Line. It cannot be programmed as a Speed
Call or Feature key. Your telephone may have other
line appearances as well (Line Select keys).
Your Communications Department is responsible for
programming Line Select and Feature keys on your
extension. Keys that are not programmed as Line
Select or Feature keys can be programmed as
Speed Call keys. You can use the following tables
to keep a record of the speed calls and features
programmed on your SUPERSET 410 Personal
Keys.
Left Side:
Line Select/Speed Call
Line
/Feature Key
6
4
2
Right Side:
Line Select/Speed Call
/Feature Key
PRIME LINE
Line
5
3
1