For Users On Resilient 3300 Icp Systems; 5235 Ip Phone And Line Interface Module - Mitel 5235 User Manual

FOR USERS ON RESILIENT 3300 ICP
SYSTEMS
If during a call, you hear a beep repeated every 20 seconds it means that
your phone is switching to a secondary 3300 ICP system. The call continues
and there is a change in the operation of some keys and features on your
phone. Normal operation resumes when your phone switches back to the
primary system. If your phone is idle and switched to the secondary system,
you'll see a flashing rectangle on the display. The rectangle remains until the
switch to the primary system is complete..
If the 5235 IP Phone fails over to the secondary ICP, you have access to
your mailbox on the secondary ICP only if a mailbox has been programmed
for you by your Administrator.
Notes:
• The mailbox on the secondary ICP will not contain the same
messages as the mailboxes on the primary ICP. Any preferences
that are voice mail related are not carried from the primary ICP to
the secondary ICP. These preferences must be set on both ICPs.
• The History, Contacts and Settings applications do not support
resiliency. Your logs, contact information and any Settings on the
secondary ICP will not be carried from the primary ICP to the
secondary ICP.
5235 IP PHONE AND LINE INTERFACE
MODULE
The Line Interface module is an optional device that adds an analog phone
line (POTS) capability to your 5235 IP phone. If Emergency Call Routing is
not programmed on your 3300 ICP, you must use the Line Interface Module
to dial emergency calls. For more information on emergency number dialing,
refer to Emergency Calls.
If you have a Line Interface Module connected to your 5235 IP Phone, all
programming of the Line Interface Module, except the Analog Key, is done
by the Installer when your phone is installed. For more information, refer to
Program a Hard Key and Using the Line Interface Module.
-9-