Table of Contents
Advertisement
Chapter 1. Installing an AMCC 3ware 9590SE RAID Controller
Connecting Drive Activity LED
Indicators
Connecting drive activity LED indicators is optional. For a
discussion of whether to make these connections, see "Deciding
Whether to Use the LED Status Connector" on page 4.
Figure 10, 11, and 12 show the location of LED indicators on the
different 9590SE controllers.
Additional detail about these connectors starts on page 18.
Figure 10. 8-Port 3ware 9590SE-8ML Serial ATA RAID Controller
LED indicators for individual drives
J7 is for drives 0, 1, 2, 3 (left to right)
J8 is for drives 4, 5, 6, 7 (left to right)
16
3ware 9590SE Serial ATA RAID Controller Quick Install Guide
Overall LED drive status indicator is the
right-most LED header pin pair on each
LED connector (J7 and J8). The anode is
the lower of the two pins and the cathode
is the upper.
Advertisement
Table of Contents
