Table of Contents
Advertisement
, on the CD that came with your controller, and
In PDF format
available through the 3ware website:
3ware Serial ATA RAID Controller User Guide
3ware 9000 Series Serial ATA RAID Controller CLI Guide
In HTML format
Online help is available from 3DM 2 (3ware Disk Manager)
Additional support information is available in the 3ware
Knowledgebase, at this website:
Installation Considerations
Air Flow, Cable Length, and Routing Space
Adequate airflow and ventilation are particularly important for
3ware 9590SE RAID controllers. The on-board heat sink collects
heat, and must have adequate airflow in order to disburse it. It is
important that the cables do not obstruct the air flow or prevent
proper ventilation of the system.
Selecting the Slot in Which to Install the Controller
Consider these factors when deciding on the slot in which to insert
the controller:
3ware 9590SE RAID controllers must be installed in PCI
Express slots. They may be installed in PCI Express x4, x8, or
x16 slots.
Note that some desktop systems come with a PCI Express slot
that has only one lane (x1). The 3ware 9590SE RAID controller
cannot be installed in a PCI Express x1 slot.
Do NOT insert the 9590SE controller into a PCI-X
Warning!
slot. Doing so could potentially damage the board or the
system, and void the warranty.
Cable routing may be easier if you install the 3ware RAID
controller next to an open slot.
www.3ware.com
:
Before You Begin
http://www.3ware.com/KB
3
Advertisement
Table of Contents
