Advertisement
Quick Links
LANTIME M200/GPS: Compact NTP Time Server with integrated GPS
Reference Clock
LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer
networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a
built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is
capable of bridging interferences or a temporary loss of reception.
Important note
Produktgruppe
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface [1]
utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP,
SYSLOG, SNMP
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Antenna connected with up to 300m of standard coaxial cable RG58
rev 2013.0704.1631
and console based graphical configuration
(Demo)
Page 1/4
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
http://www.meinberg.de
info@meinberg.de
lantime-m200-gps
Advertisement
Related Manuals for Meinberg LANTIME M200/GPS
Summary of Contents for Meinberg LANTIME M200/GPS
-
Page 1: Key Features
This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. - Page 2 Description The GNU/Linux operating system of the LANTIMEs SBC (Single Board Computer) has been optimized to ensure a high level of security and reliability. A large LC display shows the state of the internal GPS receiver and the NTP subsystem. Three LEDs (green/red) indicate the status of the three main components: Reference Time (GPS), Time Synchronization Service (NTP) and Network (Link status).
- Page 3 Characteristics Type of receiver 6 channel GPS C/A-code receiver Type of antenna Remote powered [2] GPS antenna/converter unit , up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable Display LC-display, 2 x 40 characters, with backlight Control elements Eight push buttons to set up basic network parameters and to change receiver settings Status info...
- Page 4 Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection. Software updates are provided free of charge, for the lifetime of your Meinberg product. RoHS-Status of the product This product is fully RoHS compliant WEEE status of the product This product is handled as a B2B category product.
Need help?
Do you have a question about the LANTIME M200/GPS and is the answer not in the manual?
Questions and answers