Editing And Deleting One-Touch Keys - Sharp AR-FX5 Operation Manual

Operation manual (for facsimile)
Table of Contents

Advertisement

EDITING AND DELETING ONE-TOUCH KEYS

If you wish to delete a one-touch key or change the fax number, name, or other information programmed in a one-
touch key, follow steps 1 through 3 on page 6-2 and then perform the following procedure.
1
Touch the AMEND/DELETE key.
AMEND/DELETE
2
Touch the one-touch key you wish to edit or
delete.
DIRECT ADDRESS / AMEND/DELETE
SELECT ADDRESS TO AMEND/DELETE.
SHARP CORPORATION
CORPO.TPS
SHARP GROUP
SHARP DIGITAL DOCU
SLA SCANNER TEAM
CLIFF QUIROGA
DANIEL ERNY
CHARLER WATTS
FREQUENT USE
ABCD
EFGHI
JKLMN
To edit a one-touch key, follow steps 3 and 4.
To delete a one-touch key, follow steps 5 and 6.
When you have finished editing or deleting,
touch the EXIT key.
NOTE
If you cannot edit or delete a one-touch key
If you attempt to edit or delete a one-touch key in the following situations, a warning message will appear and editing/deletion
will not be possible.
The one-touch key you wish to edit or delete is currently being used for transmission or is used in a currently stored
transmission job (including a timer transmission).
The one-touch key is included in a group key.
The one-touch key is included in a group of end receiving machines for an F-code relay broadcast operation.
The one-touch key is included in a program.
If the key is being used for a current transmission or currently stored transmission, cancel the transmission or wait until it is
completed and then change or delete the key. If the key is included in one of the above groups, delete the key from the group
and then change or delete the key.
STORING, EDITING, AND DELETING AUTO DIAL KEYS AND PROGRAMS
EXIT
PROGRAM
OPQRST UVWXYZ
ABC
GROUP
3
Touch the key corresponding to the information
you wish to change (change the information in
the same way as you stored the information on
page 6-3).
DIRECT ADDRESS / AMEND/DELETE
FAX
NAME
SHARP CORPORATION
INDEX
USER 3
FAX No.
KEY NAME
SHARP CORPORATION
4
Make sure that your changes are correct, and
then touch the EXIT key.
DELETE
EXIT
INITIAL
S
5
Touch the DELETE key.
DELETE
EXIT
INITIAL
S
6
Touch the YES key.
DELETE THE ADDRESS?
SHARP CORPORATION
NO
YES
SHARP CORPORATION
MODE
DELETE
EXIT
INITIAL
S
0666211221/3456/987654
MODE
33.6 kbps/NONE
If you wish to change
another one-touch key,
repeat steps 2 through 4.
If you wish to delete another
one-touch key, repeat steps
2, 5, and 6.
33.
6-5
6

Advertisement

Table of Contents
loading

Table of Contents