Table of Contents
Advertisement
Printer
Before using the printer, read the printer manual. V'
To use a printer, complete the following procedures:
Connecting the Printer
l
Setting the System Configuration Utility
l
Installing the Printer Driver
l
Connecting a Printer
Turn off the notebook and the printer.
1.
Open the connector compartment cover on the rear side of the notebook.
2.
With a 25pin cable, connect the printer to the parallel port of your notebook.
3.
If the connector has screws, tighten them.
Setting the System Configuration Utility
1.
Turn on or restart the notebook.
When the message cF2> to enter System Configuration Utility appears, press
2.
F2.
Click Advanced.
3.
Select LPT Port; then, LPTl, Addr 378 IRQ7, and click OK.
4.
Click Exit and select Save Changes and Exit.
5.
Click OK. The system restarts.
6.
If your printer does not operate appropriately, change LPT Extended
Mode under the Advanced menu, referring to the printer manual.
Installing the Printer Driver
From the Start menu, select Settings - Printers.
1.
2.
4 '
Peripherals 4-5
Advertisement
Table of Contents
