Table of Contents
Advertisement
Infrared Communication
Using the IR (infrared) port located on the right side of your notebook, you can
organizers, computers or printers. See the manual or online help of each application
for the details.
Positioning and Preparing the Notebook and the Target Device
To establish wireless communication:
1.
Put your notebook on a flat surface.
2.
Place the target device so that its IR port is in line with that of the notebook.
Adjust the distance between the IR ports to less than 20 inches (50 cm).
3.
When using a Sharp electronic organizer, make sure the two IR ports are
within 4 inches (10 cm) apart.
Setting for Infrared Communication
You
have to set the following items in the System Configuration Utility.
Turn on or restart your notebook.
1.
2.
When the message cF2>
F2.
Advanced
In the
3.
is set to
Power
4.
In the
menu, uncheck the item
Exit;
5.
Click
then,
6.
After the notebook restarts, turn off the Windows power management (see
Chapter 3).
. Do not enter a suspend mode during the infrared communication.
infrared communication.
to enter System Configuration Utility
menu, make sure the
or
Enable Power Management.
Save Changes and Exit.
appears, press
is set to
and COM
Communication Functions 5-1
Port
Advertisement
Table of Contents
