Table of Contents
Advertisement
Printer
You can connect a printer to a parallel port of the rear side of your computer.
Before using a printer, read the printer manual.
Setting the Setup Utility
In the Advanced menu of the Setup Utility, set the LPT Port to Auto or Enabled.
Also set the LPT Mode, referring to your printer manual.
Installing a Printer Driver
To use a printer, you need to install a printer driver.
1.
From the Start menu, select Settings - Printers.
2.
Double-click Add Printer. The Add Printer Wizard appears.
3.
Click Next.
4.
Select Local printer or Network printer according to your printer status.
5.
Select the manufacturer and the printer, and click Next. If you cannot find the
model name of your printer, you have to install the printer driver included with
your printer. See your printer manual for details.
6.
Select LPT1 and click Next.
7.
Make sure the printer name is correct, and click Next.
8.
Decide whether to print a test page, and click Finish. Before printing a test
page, make sure the printer is ready.
4
4-3
Advertisement
Table of Contents
