To remove USB devices, you may need to perform the following before you remove
them:
1.
Double-click Unplug or Eject Hardware icon on the task bar.
2.
Select the device you want to remove and click Stop.
3.
Confirm the device name you want to remove is highlighted, then click OK.
4.
Click OK in Safe To Remove Hardware.
If you use the USB port to install a pointing device or a keyboard,
the built-in glide pad and the built-in keyboard remain active.
Connecting a Printer
Most printers connect through the parallel/FDD port on the rear side of your
computer.
Installing a Printer Driver
After you have connected the printer to your computer through the parallel/FDD
port, install a printer driver following the steps below:
1.
From the Start menu, select Settings - Printers.
2.
Double-click the Add Printer icon. The Add Printer Wizard appears.
3.
Click Next.
Rear side USB port
Left side USB port
Parallel/FDD port
4
4-11