Table of Contents
Advertisement
Display
You can use a CRT monitor or a TV set as an external monitor. To display only on
a CRT monitor, use a VGA-compliant model or model with 1024x768 or higher J
resolution. To display on CRT and LCD simultaneously, use a model with
1024x768 or higher resolution.
Connecting a CRT Monitor
Start
1.
From the
Display.
2.
Double-click
Settings;
3.
Select
Monitor;
4.
Select
Show all devices
5.
If you see
step.
6.
Select the manufacturer and the model name of which CRT you want to
connect.
Click OK; then, Close.
7.
Follow the instructions on the screen, if any.
8.
Display Properties
Close the
9.
Turn off the notebook and the CRT monitor.
10.
Open the connector compartment cover on the rear side of the notebook.
11.
12.
With a 15-pin monitor cable, connect the CRT monitor to the external monitor
port of your notebook. If the connector has screws, tighten them.
Turn on the CRT monitor and the notebook. The display is shown only through
13.
the CRT monitor first.
Switch the display in the procedure in the latter part of this section.. *J
14.
Connecting a TV Set
Turn off the notebook and the TV set.
1.
Using a video cable, connect the video output jack of the notebook to the TV
2.
set.
3.
Turn on the TV set, and set it to the video mode.
4.
Turn on the notebook.
Peripherals
4-2
Settings - Control Panel.
menu, select
Advanced Properties.
then,
Change . . .
then,
in the dialog box, select it. If not, go on to the next 4'
window by clicking OK. v
V
Advertisement
Table of Contents
