Using The Setup Utility; Leaving The Setup Utility - Sharp PC-9300 Manual

Using the Setup Utility

The Setup utility menu bar has six choices: Main, Advanced, Security, Power,
Boot, and Exit. You can move between each of the six pages by using the left and
right arrow keys. Each page has a list of items, or fields. On the right of each field
there are one or more values. You can move a highlight up and down in the list of
values by using the cursor up and down arrow keys. If a field has more than one
value, you can move from one value to the next by pressing the Tab key.
When a value is highlighted, you can change it to an alternate value by pressing
the Minus key, or the Space Bar. The Space Bar progresses forwards through
the available values, while the Minus key runs backwards through the available
values.
Certain fields may require you to type in a value instead of selecting a pre-
installed value. Some other fields are automatically set by the notebook, and so,
you cannot highlight the value and change it.
Some fields might be preceded by a ! ! ! ! sign. When you highlight these fields and
press Enter, a sub-menu appears. You can make changes to the sub-menu values
in the same way as you change the main page values. When you finish making
changes to a sub-menu, press Esc to return to the original page.
You can make the fields in one page return to their default values by pressing the
F9 key. Pressing the F10 key restores the values you previously saved. If you
need help, you can display a help message by pressing the F1 key.

Leaving the Setup Utility

When you have made changes to the Setup utility, either press the Esc key, or use
the arrow keys to highlight the Exit menu on the menu bar. The Exit menu has
five options. Select the option you need.
Save Changes & Exit
When you select this option, any changes you made to the field values are saved,
and the notebook restarts using the new values.
Exit Without Saving Changes
3-2