Specifications - Sharp VIEWCAM VL-SD20S Operation Manual

Appendix

Specifications

VIEWCAM
Signal System: PAL standard
Recording System: 2 rotary heads, helical scanning system
Recording/Playback Time: 90 minutes (DVM60, LP mode)
Tape Speed: SP mode: 18.831 mm/second
Pickup Device:
Lens Filter Diameter: 30 mm
Microphone: Electret stereo microphone
Colour Temperature Compensation: Auto white balance with white balance lock
Minimum Illumination: 6 lux* (with gain-up, F1.8)
Video Output Level: 1.0 Vp-p 75-ohm unbalanced
Audio Output Level:
Speaker Output: 300 mW
External Microphone Input: 3.5 mm diameter mini-plug,
Power Requirement: DC 7.4 V
Power Consumption: 4.8 W (during camera recording in Full Auto mode with zoom
Operating Temperature: 0 C to
Operating Humidity: 30% to 80%
Storage Temperature:
Dimensions (approx.): 158 mm (W)
Weight (approx.): 555 g (without battery pack, lithium battery, video cassette, and
AC Adapter
Power Requirement: AC 110–240 V, 50/60 Hz
DC Output: 9.0 V
Power Consumption: 15 W
Dimensions (approx.): 68 mm (W)
Weight (approx.): 230 g
Specifications are subject to change without notice.
*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum
illumination capability, lux ratings are comparable only between models from the
same manufacturer.
77
V L - S D 2 0 S - G B / p p . 0 7 5 - 0 7 7 ; 9 9 / 8 / 9 / 1 8 : 0 0
Cassette: Digital VCR Mini DV video cassette
LP mode: 12.568 mm/second
1 ⁄ (8.5 mm, effective size: 6.0 mm) CCD image sensor (with
3
approx. 770,000 pixels including optical black)
Lens: 10 optical/100 digital power zoom lens (F1.8–2.8,
f 4.5–45 mm), full-range auto focus
Monitor: 3 (7.5 cm) full-colour LCD screen (TFT active matrix)
8 dBs, impedance less than 2.2 kohms
6.8 kohms, DC 4.0 V, for plug-in-power microphone use
motor off and backlight in normal mode)
40 C
20 C to 60 C
98 mm (H)
lens cap)
37 mm (H)
G. K . A s s o c i a t e s , To k y o
66 dBs, output impedance
74 mm (D)
130 mm (D)