Picture/Backlight Adjustments - Sharp VIEWCAM VL-SD20S Operation Manual

Advanced Features
Camera Recording
Picture/Backlight
Adjustments
If the monitor picture is difficult to see due to
ambient lighting, etc., adjust the picture
settings. This feature can be adjusted in both
Camera and VCR modes.
• The example screens for this feature are for
Camera mode.
1
Press the CONTROL switch until
appears.
2
Press the PICTURE button (
display the adjustment screen.
P I C-
TU RE
B AC K L I GHT
BR I GHT
C OLOUR
3
Toggle the CONTROL switch (Q) to
select the item you wish to adjust, then
press the CONTROL switch (W).
BACKL I GHT
BR I GHT
COLOUR
BACKL I GHT
BR I GHT
55
V L - S D 2 0 S - G B / p p . 0 4 8 - 0 5 8 ; 9 9 / 7 / 2 8 / 1 8 : 0 0
4
Toggle the CONTROL switch to adjust
the item to the desired setting.
BR I GHT
) to
COLOUR
P I C TURE
A U T O
Type of Backlight modes
("BACKLIGHT")
AUTO: The VIEWCAM automatically switches
between "NORMAL" and "BRIGHT"
depending on the ambient lighting. This
SE T E X I T
mode is only available in Camera mode.
NORMAL: For use indoors or under
moderate lighting conditions.
BRIGHT: For use outdoors under strong
lighting conditions, such as bright daylight.
Example
5
P I C TURE
Press the CONTROL switch to set the
AUTO picture/backlight setting.
6
Press the EXIT button (MODE DISPLAY)
to turn off the adjustment screen.
Notes:
SE T E X I T
• If you set the backlight ("BACKLIGHT") to
"AUTO" in Camera mode and then set the
VIEWCAM to VCR mode, the backlight mode
P I C TURE automatically changes to "NORMAL".
• When the colour is adjusted, the picture on the
AUTO
screen may differ from the picture actually
recorded. Do not change the colour setting
unless it is necessary. (This adjustment only
affects the monitor picture, not the recorded
image.)
G. K . A s s o c i a t e s , To k y o
BACKL I GHT NORMAL
BACKL I GHT AUTO
BACKL I GHT BR I GHT
Darker Brighter
Decrease Increase