Removing And Installing The Lamp Unit - Sharp XV-Z90U Operation Manual

Replacing the Lamp

Removing and installing the lamp unit

CAUTION
• Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the
projector.
• To avoid injury to yourself and damage to the lamp, carefully follow the steps below.
• Replace the lamp after turning off the power and unplugging the power cord.
1 Turn off the power. Turn off the power.
Press POWER OFF. Wait until the
cooling fan stops running.
Loosen the user service
4
screw that secures the
lamp cage cover.
7 Remove the lamp cage.
E-47
2 Unplug the power cord. Unplug the power cord.
Slide the lamp cage
5
cover in the direction
of the arrow.
Insert the new lamp cage
8
firmly into the lamp cage
compartment.
3 Remove the Swivel
Stand. (See page 17.)
Loosen and remove the
6
three-securing screws
from the lamp cage.
User service screws
Tighten the three-
9
securing screws to
fasten the lamp cage.