Download
Share
Print this page
Sharp XV-Z9000U Supplemental Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XV-Z9000U - Vision - DLP Projector
  6. Supplemental service manual
Sharp XV-Z9000U Supplemental Service Manual

Sharp XV-Z9000U Supplemental Service Manual

Hide thumbs Also See for XV-Z9000U:

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual
In the interests of user-safety (Required by safety regulations in some countries) the set should
be restored to its original condition and only parts identical to those specified should be used.
Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät
in seinen Originalzustand gebracht werden. Außerdem dürfen für die spezifizierten Bauteile nur identische
Teile verwendet werden.
» The PC interface board programs have been updated as from the January 2002 production in order to
improve the lip synchronization function.
» This SUPPLEMENT MANUAL discusses the program updating procedure. For to-be-reprogrammed
units from users, first check the programs' version and then take their proper steps.
CONTENTS
» Improving the Z9000U units ................................... 2
» Reprogramming procedure ...................................... 5
» Modifications on the PC interface board ............. 1 2
SHARP CORPORATION
TENTATIVE
SERVICE MANUAL
SERVICE-ANLEITUNG
SUPPLEMENT
DLP PROJECTOR
DLP PROJEKTOR
MODELS
XV-Z9000U/E
MODELLE
OUTLINE
BESCHREIBUNG
Page
» .................................................................................. 1 0
» .................................................................................. 1 2
» .................................................................................. 1 8
This document has been published to be used
for after sales service only.
The contents are subject to change without
1
XV-Z9000U/E
SUPPLEMENT
S 8 1 Y 7 X V Z 9 0 0 0 U
INHALT
Seite

Advertisement

loading

Related Manuals for Sharp XV-Z9000U

Summary of Contents for Sharp XV-Z9000U

  • Page 1 XV-Z9000U/E TENTATIVE SUPPLEMENT SERVICE MANUAL SERVICE-ANLEITUNG S 8 1 Y 7 X V Z 9 0 0 0 U SUPPLEMENT DLP PROJECTOR DLP PROJEKTOR MODELS XV-Z9000U/E MODELLE In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
  • Page 2 XV-Z9000U/E SUPPLEMENT ËImproving the Z9000U units (Program version-up for HTPC (Home Theater PC) compatibility, performance upgrading and lip synchronization improvement) The Z9000U units have been improved in the following 3 points. These improvements can be confirmed by looking at the program versions.
  • Page 3 XV-Z9000U/E SUPPLEMENT 3) Modifying the hardware » Remove the PC interface board from the unit. Make the following modifications. (1) Add two jumper leads. Connect one jumper between TL88 and TL136 and the other between TL87 and TL140. Apply adhesive to the specified points to secure the jumpers. Refer to the attachment file “0051 Modi- fications”.
  • Page 4 XV-Z9000U/E SUPPLEMENT Upgrading from Level-x to Level-c (No modifications on the hardware) 1) Checking the unit » Select "STATUS" on the menu screen and look at the right bottom of the screen to check the program version. If the version is "Z901927", take the following procedures.

  • Page 5: Reprogramming Procedure

    XV-Z9000U/E SUPPLEMENT ËReprogramming procedure Requirements on the programming PC OS: Windows95, 98 or NT4.0 » RS232C terminal (No problem if compatible with SVM or SAPS) » For this programming, the operator must be able to do the following levels of running the computer.
  • Page 6 XV-Z9000U/E SUPPLEMENT c. Click on [Continue]. . The "NOTE: ~" message appears. Click on [Continue].
  • Page 7 XV-Z9000U/E SUPPLEMENT e. The "Tera Term Pro Setup Destination Path ~" message appears. Click on [Continue].Do not change the Path entry. The program may fail to work. . The "Tera Term Pro Setup Complete" message appears.Finally click on [OK].
  • Page 8 XV-Z9000U/E SUPPLEMENT 2) Installing the projector program and write macro a. Click on the attached "dsetup.exe" file. b. The "dsetup window" opens and click on [OK]. Do not change the "Install Directory"entry. The program may fail to work.
  • Page 9 XV-Z9000U/E SUPPLEMENT Programming the Z9000 units <Precautions> Be sure to strictly follow the programming procedure. And the projector may fail to work if the power is shut down halfway, the serial cable gets disconnected, or a wrong step is taken.
  • Page 10 XV-Z9000U/E SUPPLEMENT f. Open the "C\Program Files\TTERMPRO" folder using the Explorer on the computer. g. Double-click on the "write.bat" file. h. The program updating gets started. The "Tera Term Send file" dialog box appears. See if the number located below "Butes tramsfered: xxxx" is counting up. This means the program is...
  • Page 11 XV-Z9000U/E SUPPLEMENT i. Soon after, the "Transfer Program" dialog box appears. Click on [OK]. i. Finally unplug the AC power cable and plug it in again. Switch on the power again. The above procedures have been tested and confirmed on a "Windows98 [English version] "...
  • Page 12 XV-Z9000U/E SUPPLEMENT ËModifications on the PC interface board Connect one jumper between TL88 and TL136 and the other jumper between TL87 and TL140. Apply adhesive to the two points indicated above.
  • Page 13 XV-Z9000U/E SUPPLEMENT...
  • Page 14 XV-Z9000U/E SUPPLEMENT TQ0000-S D Japan P Japan Feb. 2002 Printed in Japan SY. KD...

This manual is also suitable for:

Xv-z9000e