Connecting To A Computer - Sharp XV-Z90U Operation Manual

Hide thumbs Also See for XV-Z90U:
Table of Contents

Advertisement

Connecting to a DVD Player and DTV Decoder
Connecting to a DTV decoder with DVI output
1 Slide the "DIGITAL INPUT TYPE" switch on the back terminal board to "VIDEO".
2 Connect the DVI cable to the DIGITAL INPUT terminal.
3 Connect the other end to the Corresponding terminal on a DVD player and DTV decorder.
When connecting this projector to analog RGB output of the DTV decoder, select "Component" for "Signal Type" on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before switching the "DIGITAL INPUT TYPE" swich and
connecting.
Projector
1
Connecting to a DTV decoder with analog RGB output
1 Connect the DVI to 15-pin D-Sub adaptor.
2 Use the above cables to connect the projector and the DTV decoder.
When connecting this projector to analog RGB output of the DTV decoder, select "Component" for "Signal Type" on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before switching the "DIGITAL INPUT TYPE" swich and
connecting.
Projector

Connecting to a Computer

When the RS-232C port on the projector is connected to a computer with an RS-232C cable (null modem, cross
type, commercially available), the computer can be used to control the projector and check the status of the
projector. See pages 52 and 53 for details.
Connecting a computer with analog RGB output
1 Connect the DVI end of the DVI to 15-pin D-sub adapter to the INPUT 2 port on the projector.
2 Connect the D-sub end of the DVI to 15-pin D-sub adapter to the computer.
When connecting this projector to a DVD player or DTV decoder, select "RGB" for "Signal Type" on the OSD menu or press
RGB/COMP. on the remote control. (See page 36.)
DVI cable
(commercially available)
2
DVI to 15-pin D-sub adaptor
(sold separately AN-A1DV)
DVI to D-sub 15-pin cable
2
(sold separately AN-A1DV)
RS-232C cable (null modem, cross type,
commercially available)
DTV decoder
3
DTV decoder
1
E-14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv-z90ul

Table of Contents