Listening To The Radio - Sharp QT-V5E Operation Manual

Listening to the radio

QT-V5E
Aerial adjustment
For FM broadcasts, raise and extend the telescopic rod aerial, then adjust the posi-
tion and length for the best reception. For AM, simply move or rotate the unit for the
best sound (the telescopic rod aerial does not affect the reception).
FM
28
" Tuning
1
Press the ON/STAND-BY switch on the main unit to turn the power
on.
2
Press the TUNER/BAND button repeatedly to select the desired
frequency band (FM or AM).
FM stereo mode
3
Press the
Manual tuning:
Press the TUNING
in to the desired station.
Auto tuning:
When the TUNING
onds, scanning starts automatically and the tuner stops at the first receivable
broadcast station.
Notes:
! When radio interference occurs, auto scan tuning may stop automatically at that
point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the TUNING
When the FM stereo mode is selected:
! "STEREO" will appear when an FM broadcast is in stereo.
AM
! If the FM reception is weak, press the TUNER/BAND button to select the FM mon-
aural mode. The reception changes to mono, and the sound becomes clearer.
04/6/8
FM monaural mode
or button to tune in to the desired station.
or ( or ) button as many times as required to tune
or ( or ) button is pressed for more than 0.5 sec-
or ( or
Disappear
QT-V5E_UK_4.fm
AM mode
) button again.
FM stereo receiving
indicator
9HX80432100003