Battery Installation; Turning The Power On - Sharp QT-V5E Operation Manual

Battery installation

1
Remove the battery cover.
2
Insert the 2 supplied "AAA" size batteries (UM-4, R03, HP-16 or sim-
ilar) according to the direction indicated in the battery compart-
ment.
When inserting or removing the batteries, push them towards the
nals.
3
Replace the cover.
Precautions for battery use:
! Replace all old batteries with new ones at the same time.
! Do not mix old and new batteries.
! Remove the batteries if the unit is not to be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
! Do not use rechargeable batteries (nickel-cadmium battery, etc.).
! Incorrect installation may cause the unit to malfunction.
Notes concerning use:
! Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
! Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
! Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
! Keep the remote control away from moisture, heat, shock, and vibrations.

Turning the power on

" To turn the power on
1
Set the ON/STAND-BY switch on the main unit to
2
When the ON/STAND-BY switch on the main unit is set to
can also turn the power on or put the unit in the stand-by mode
battery termi-
using the ON/STAND-BY button on the remote control.
1
After use:
When not using this unit, set the ON/STAND-BY switch on the main unit to
" Test of the remote control
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy music.
0.2 m - 6 m
QT-V5E_UK_2.fm
04/6/8
QT-V5E 9HX80432100003
ON.
ON, you
2
.
Remote sensor
9HX80432100003
3
QT-V5E
1
2
3
4
5
6
7
8
13