Sharp QT-CD180 Operation Manual
Sharp QT-CD180 Operation Manual

Sharp QT-CD180 Operation Manual

Portable cd stereo system

Advertisement

PORTABLE CD STEREO SYSTEM
MODEL
QT-CD180

OPERATION MANUAL

Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP
product.
Quick Guide / Guía rápida ............. Pages 10-11 / Página 10-11
NOTE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
G Reorient or relocate the receiving antenna.
G Increase the separation between the equipment and receiver.
G Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
G Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user's authority to operate this equipment.
NOTES
G It is the intent of Sharp that this product be used in full compliance
with the copyright laws of the United States and that prior permis-
sion be obtained from copyright owners whenever necessary.
G The letters in brackets contained in the model number indicate the
color of the product only. Operation and specifications are unaffected.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record
below the model number and serial number which are located on the bottom of the
unit.
Please retain this information.
Model number
.................................................................................
Serial number
.................................................................................
Date of purchase .................................................................................
Place of purchase .................................................................................

Advertisement

Table of Contents
loading

Summary of Contents for Sharp QT-CD180

  • Page 1: Operation Manual

    NOTES G It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permis- sion be obtained from copyright owners whenever necessary.
  • Page 2: Special Notes

    Refer internal service to your local SHARP service facility. product’s enclosure that may be of sufficient magnitude G Use the unit on a firm, level surface free from vibration, and do not to constitute a risk of electric shock to persons.
  • Page 3: Important Safeguards

    G R O U N D CLAMP Carts and Stands - The appliance should be used only with a cart or stand that is ANTENNA DISCHARGE UNIT recommended by the manufacturer.
  • Page 4: Controls And Indicators

    Notes: 05. (TAPE) Stop/Eject Button 14. (CD) Stop Button G If the unit will not be used for a long period of time, remove the AC 06. (TAPE) Fast Forward Button 15. (CD) Track Down/Review power cord from the AC outlet.
  • Page 5: Operation With Batteries

    G Replace all old batteries with new ones at the same time. G Do not mix old and new batteries. G Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.
  • Page 6: Listening To A Cd

    Notes: G Keep the CD compartment closed except when loading discs. G When the end of the disc is reached while cueing, “En” will appear in the G Playing certain compact discs at a high volume may cause mistracking. display and CD operation is paused. Press the REVIEW/DOWN 5 but- In this case, listen at a lower volume.
  • Page 7: Listening To A Cassette Tape

    Precautions: G Be sure not to press the PLAY 1 1 1 1 1 and REWIND 2 buttons simulta- center, along the radius. neously, or the tape will become damaged.
  • Page 8: Recording To A Cassette Tape

    G When recording important selections, make a preliminary test to en- Set the FUNCTION switch to CD. sure that the desired material is properly recorded. G SHARP is not liable for damage or loss of your recording arising from Load the disc to be recorded. malfunction of this unit.
  • Page 9: Maintenance

    Condensation can cause the unit to malfunction. Motor DC 9 V electric governor If this happens, leave the power on with no disc (or cassette) in the unit Bias system AC bias until normal playback is possible (about 1 hour).
  • Page 10 120 V de CA, 60 Hz G 6 “D” size batteries (UM/SUM-1, R20, HP-2 or similar) G Batteries are not included. G 6 pilas del tamaño “D” (UM/SUM-1, R20, HP-2 o similares) To an AC outlet G Las pians no están incluidas.
  • Page 11: Advanced Cd Playback

    Advanced CD Playback Listening to a tape / Audictión de una cinta Listening to the radio / Audictión de la radio To stop playback Press the STOP/EJECT I 7 button. Para detener la reproducción Pulse el botón STOP/EJECT I 7.
  • Page 12 In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than...

This manual is also suitable for:

Cd180

Table of Contents