General Control - Sharp QT-V5E Operation Manual

General control

Some of these functions are only available on the remote control.
" To change the display brightness (3 levels)
You can switch the display brightness by pressing the DIMMER button.
Each time the button is pressed, the display brightness changes in the following
order.
Brightened OFF
" Adjusting the volume
Press the VOLUME + button to increase the volume and
the VOLUME - button to decrease the volume.
You can also use the VOLUME + or VOLUME - button on
the main unit.
" Emphasising the bass
1
Press the SOUND MODE button repeatedly to select "XBS OFF".
2
Within 5 seconds, press the or
Increase
To cancel, select "XBS OFF".
" Setting surround effects
1
2
" Changing the sound quality
1
2
Dimmed
When "CUSTOM" is selected in step 2, you can adjust the bass and
treble.
1 Press the
2 Within 5 seconds, press the
00 01 31 32
button to select "XBS ON".
Unchanged
Press the SOUND MODE button repeatedly to select "SUR OFF".
Within 5 seconds, press the or button to select "SUR ON".
To cancel the surround, select "SUR OFF".
Press the SOUND MODE button repeatedly to select "FLAT".
Within 5 seconds, press the or button to select the desired
sound quality "FLAT", "CUSTOM", "ROCK", "POP", "JAZZ" or
"CLASSIC".
FLAT CUSTOM ROCK POP
FLAT : The sound is not modified.
CUSTOM : Customise the bass and treble levels.
or button to select "TREB", or "BASS".
or button to adjust the treble or the bass.
-7 7
QT-V5E_UK_2.fm
04/6/8
QT-V5E
JAZZ CLASSIC
-7 7
15
9HX80432100003
1
2
3
4
5
6
7
8