Remote Control; Remote Sensor; Battery Installation - Sharp XL-DV50H Operation Manual

Remote control

! Battery installation

1
2
3
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunc-
Downloaded From Disc-Player.com Sharp Manuals
Remove the battery cover.
Insert the supplied batteries according to the direction indi-
cated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Replace the cover.
of time. This will prevent potential damage due to battery leak-
age.
tion.
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
! Test of the remote control
Check the remote control after checking all the connections (see
pages 12 - 16).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
0.2 m - 6 m
(8" - 20')
04/3/19 XL-DV50H(A).fm
XL-DV50H
1
2
3
4
5
6

Remote sensor

7
8
9
10
17
TINSEA027SJZZ